Hi Samur,
Wich version Oscam is the best for VU+DUO4KSE ARM architecture image OpenPLI Release 9.0 ? I watch "Tricolor TV" CI+ with official Russian card + shara
Thanks for the answer
Samur's OSCam - Request for compilation, questions and help !!!
-
- Various Support
- samur
- Thread is marked as Resolved.
-
-
To get AFN AU to work is there any special config needed in Softcam.key file?
Left it on AFN sports for over an hour and its not getting the keys.
ARM r11759-801
-
Hello samur. aarch64 - test 2, tested on RPi4, works perfectly after reboot. Thank you for your work
-
Hi Samur,
Wich version Oscam is the best for VU+DUO4KSE ARM architecture image OpenPLI Release 9.0 ? I watch "Tricolor TV" CI+ with official Russian card + shara
Thanks for the answer
;
-
(ATR: CE FC FE 02 3C C0 8C 8C 0E B0 32 0E B2 7E 0E BC CE CE 72 3C B2 BC)
Could there be a problem with the card reader?
So what is the correct ATR value?
ATR : 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
-
Which version of oscam to use for amiko viper 4k v30- open atv 7.4?
-
ATR : 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
Yes, i said before provide a debug 6 log in .txt format file...
Or post your Card Files ...
-
@mj_84 - I would try this one Samur - OSCam For sf8008 and others [ boxes_Arch:arm ]
-
i need a debug 4 log from initial till first CW .
and provide the debug 4 log in '.txt' Format file
##
0624 card in DMone work without problem, only 0668 problem
-
Yes, i said before provide a debug 6 log in .txt format file...
Or post your Card Files ...
initial_debuglevel = 6 -
But in ARM there are outages :(
-
-
Ok
Thanks to added gbox protocol ;)
-
Is there any configuration available for nova 13e and use with original card.
-
Is there any configuration available for nova 13e and use with original card.
Do you have your Chip-ID and CWPK key ?
-
Hi,
What's the correct oscam for using in a DM800 with openblackhole 4.5 image?
Regards.
-
-
Is there any configuration available for nova 13e and use with original card.
Do you have your Chip-ID and CWPK key ?
Is it possible to calculate the cwpk key (TDES key for decryption of encrypted cws) using the chip-id ??
-
Display More
it's a first time i see an Irdeto card like yours
Does your card produces same errors with oscam-trunk ?
your card is it for cable TV ?
Right now, i have nothing to offer for you because it seems that it's a problem unique to you.
###
Do you have your Chip-ID(Pairing-ID) ? you can find it on the module (10 decimal digits)
Or you can use season-logger to get it.
;
card for DVB-T/T2 platform,
the card was sold without a CAM module,
CAM module is used for cardless CAid 069A
same problem with trunk 11734
-
card for DVB-T/T2 platform,
the card was sold without a CAM module,
EnoSat you try to use the the 'dynamic camkey' of the 0624, but since the 0668 is not l2b ,
that's why it doesn't work .
you have to use the same configuration as the original oscam-trunk
for the 0668 card . (add the rsa and box key to the configuration)
####
For the aarch64 Device you will need to find a correct config:
you should try to find the right data speed for the card,
you should somehow synchronize the reader with the card...
https://wiki.streamboard.tv/wi…nfig/oscam.server#cardmhz ((cardmhz, mhz, autospeed)
;
OSCam-EMU Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
