TSReader Lite
TSReader is a very popular MPEG-2 transport stream analyzer. Used by thousands of people around the world, it allows inspection and recording of data carried in these television streams used for satellite, cable, off-air and IPTV streaming such as UDP, RTP, HLS and MPEG-DASH.
It supports ATSC, Digicipher II, DVB, ISDB, and SCTE extensions to the base MPEG-2 specification. TSReader gives the user the "big picture" overview of what's being carried inside MPEG-2 transport streams and can be very useful for finding errors or inefficiencies.
TSReader is available in three different editions. TSReader Lite is free for home users that want to investigate how digital television works. TSReader Standard adds many more features and may be used in commercial environments. TSReader Professional contains all features and is perfect for those dealing with MPEG-2 transport streams on a daily basis. The table below shows the differences between the editions.
TSReader runs on all modern versions of 32 and 64-bit Windows up-to and including Windows 10 and has a very light CPU load. Processing a 40 Mbps stream received over Ethernet will typically load a CoreDuo 2 2.4 GHz dual-core processor to about 3-5%. Multiple instances of TSReader can be used to monitor more than one stream with the Professional edition.
QuoteDisplay MoreVersion 2.8, build 56:
All: Fixed a crash with certain DVB T2-MI streams
All: Fixed an issue with browsing for the PotPlayer and FFPlay locations
All: Added support for the TBS 6504 quad-tuner card
All: Added the loopback adapter (127.0.0.1) to the network interface list in the UDP/RTP and HRTP multicast source modules
All: Added support for DVB-S2 ISI to all TBS compatible source modules
All: Added support for DVB-T2 PLP to all TBS compatible source modules
Pro: Fixed a crash in the ccextract program with certain H.264 video streams carrying very long SEI NALs
Pro: Added time offset to the generated files created with ccextract when H.264 and H.265 video is processed
Pro: Added the ability to add a description to the list of tuner commands in TSWatcher
Pro: Added an option to hide the TSReader running status when using TSWatcher
Pro: TSWatcher no longer stalls when stopping the scanning process. Now a dialog is shown with the number of TSReader instances still running with the option to immediately terminate them all
Pro: TSWatcher now generates an alarm when no data is being sent - useful for a UDP stream that's dead
Std/Pro: The IPTV source module now accepts MRLs on the command-line
Std/Pro: For UDP, RTP and HRTP protocols, the MRL can now include the Ethernet NIC address to bind to by adding a dash and the address after a dash at the end of the MRL. For example: udp://224.0.0.1:1234-192.168.0.1
Pro: TSWatcher now supports importing the IPTV.m3u playlist file and is compatible with the IPTV source module
Pro: Multiple SCTE-35 streams per program are now supported. This results in the SCTE-35 log file changing slightly - it now includes a column for the stream number in the case of multiple SCTE-35 streams
Pro: Fixed an issue with the SCTE-35 stream icon not showing correctly if the CEUI registration descriptor was attached to the stream in the PMT and not the program
Std/Pro: UDP port numbers seen by the IP/DVB decoder are now shown when clicking on an IP address in the tree-view
Pro: Fixed an issue with infrequent packet loss when multiple clients were connected to the TCP/IP forwarder
Std/Pro: Fixed an issue with some source modules not tuning correctly when the "Retune to this mux" function is used
All: When a single program transport stream is detected, TSReader now selects and displays the PMT rather than the PAT
Pro: Added the ability to do video/audio timing analysis with J2K video and PCM audio
Pro: Add a command-line tool called PCAPtoTS which extract multicast UDP, RTP and HRTP streams from PCAP and PCAPNG files
Pro: Added decoding of color primaries, transfer characteristics and matrix coefficients for H.265 video (if present in the stream)
Pro: Added the ability to scan every n minutes to TSWatcher
Pro: TSWatcher now shows the program name and logical channel number when reporting a program number
All: The UDP (and related) source modules now have a debug window option
Pro: The TCP/IP forwarder module can now do straight TCP or HTTP. In HTTP mode, requesting the root sends the entire mux. Requesting a program number sends just that single program over the connection - http://127.0.0.1:1235/ for the entire mux and http://127.0.0.1:1235/2 sends program 2
Pro: Added -E nnnn or -E 0xnnnn to set the EIT PID and —G to set the SDT/BAT PID
All: The Ethernet adapter list shown in the UDP/RTP/HRTP source modules is now sorted by the adapter's name
All: The UDP, RTP and HRTP multicast/unicast source modules now show a warning dialog if they detect packets coming from multiple addresses. Useful should you start multiple encoders with output to the same address
All: The H.264 frame rate is now shown correctly - previously it could be twice the actual frame rate
Pro: The UDP forwarder setup now shows the Ethernet NIC description in addition to the address
All: Fixed an issue with an errant space in HTML exports
Pro: Changed the format of longitude/latitude when logging the signal with GPS position. Degrees west and south are now negative which works much better for mapping programs
Pro: TSWatcher setup now allows multiple selection of command-line and profiles
All: Increased the allowable number of UDP entries to 5000. Previously it was 2500.
TSReader Lite 2.8.56 + crack
Thanks ElitEND
