openatv-6.4-dm800sev2-sim2.2-ssl88a-marwen-for-test

can it use for external

Testet. It works in flash. Thx marven. Maybe you could patch a 7.0 image for Dream800se V2?

Quote from sackisch

patch a 7.0 image for Dream800se V2?

and that loading the source image using the bootloader from the clone does not work on 800 se V2?

https://images.mynonpublic.com/openatv/7.0/index.php?open=dm800sev2

https://images.mynonpublic.com/openatv/7.1/index.php?open=dm800sev2

download the latest image from the original and install it into the receiver and do not reboot the receiver, and go back to firmware mode and select the ssl88A loader already, load it for 2-3 seconds and now press the reboot everything should work, at least on 800se there are no problems

Quote from hecha71

Quote from sackisch

patch a 7.0 image for Dream800se V2?

and that loading the source image using the bootloader from the clone does not work on 800 se V2?

Code

https://images.mynonpublic.com/openatv/7.0/index.php?open=dm800sev2

Code

https://images.mynonpublic.com/openatv/7.1/index.php?open=dm800sev2

download the latest image from the original and install it into the receiver and do not reboot the receiver, and go back to firmware mode and select the ssl88A loader already, load it for 2-3 seconds and now press the reboot everything should work, at least on 800se there are no problems

good its great method this trick working fine original image on clone box

can this method work on only openatv or other images also pli openvision etc

Quote from hitreek

good its great method this trick working fine original image on clone box

can this method work on only openatv or other images also pli openvision etc

theoretically, it does not matter which image from the original is installed in the clone receiver, the ssl88a loader is installed on top of the image from the original so as not to restore the receiver and not receive the error: CA NOT found (ERR01: CA NOT found) on the display.

and let's say you have installed an image with the bootloader 88 a and the image, for example, does not start or freezes on the boot, it's very easy for you to translate it into firmware and upload a verified image without any risks.

Hi hecha71 , I did like you described. It works so far, booting was OK but the tuner was not found. Tunerslot empty. So it seems that the tuner driver is missing. Any idea to fix it?

EDIT: New flashed with OpenPli 12.1 from download section. Tuner works again but WLAN driver is missing and I cannot install a WLAN driver from feet.

Quote from sackisch

Hi hecha71 , I did like you described. It works so far, booting was OK but the tuner was not found. Tunerslot empty. So it seems that the tuner driver is missing. Any idea to fix it?

EDIT: New flashed with OpenPli 12.1 from download section. Tuner works again but WLAN driver is missing and I cannot install a WLAN driver from feet.

yes tner missing but i install openvision and its tuner also missing then i change his module with clone module its working fine

other then openatv i same proced but after restart hang on boot logo i tried openpli 8.3 but not load because i have openpli dm 8000 if openpli 8.3 for dm 800se v2 available then hope ok

you have images for dm800 HD pvr sim 2.10?

I can test on this old box

Quote from marwen

original image unpacked and repacked by marwen on ubuntu for test thank you

sim2.2

For internal flash

thank you for testing

Display More

i use this in internal flash and now stuck my box after boot no CA found message its not for internal use only external use

now how can i recover my box any method ?

Quote from hitreek

now how can i recover my box any method ?

here, try this method as in this topic, through the dreamUP image program from dreams only for a clone

Post

RE: DM 500 HD V2 dont reboot to end

(Quote from boris1958)

https://dreamboxupdate.com/ope…x/2.0.0/images/dm500hdv2/
install the official image of the dream os first and then fill in others. I also recommend installing this image through the dream app program with the check for broken sectors option enabled https://dreambox.de/en/index.php/downloadcenter/

hecha71

Nov 18th 2022

Quote from hecha71

Quote from hitreek

now how can i recover my box any method ?

here, try this method as in this topic, through the dreamUP image program from dreams only for a clone

Post

RE: DM 500 HD V2 dont reboot to end

(Quote from boris1958)

https://dreamboxupdate.com/ope…x/2.0.0/images/dm500hdv2/
install the official image of the dream os first and then fill in others. I also recommend installing this image through the dream app program with the check for broken sectors option enabled https://dreambox.de/en/index.php/downloadcenter/

hecha71

Nov 18th 2022

its for dm 500 i have dm 800se v2 clone #88a sim2

Quote from hitreek

its for dm 500 i have dm 800se v2 clone #88a sim2

bro, what do I need you to find an image of a dream os for the clon and a patched dreamup?

I gave the link as an example and not for you to take from this post and do it, I understand perfectly well that there is a dm500hd and the original

im try this image in dreambox dm800 hd se v2 with tuner bcm4505 image working nice but upgrade with 7.2 and 7.1 tuner not show...? And im not able to search satellite

openatv-6.4-DM800SEV2 WORKING FINE

2.jpg6.jpg7.jpg

OPENATV6 4 800V2SIM

Dear Monuser, I have a request for you. If possible, could you adapt this image for the original DM800SE SSL84 device? Also, if you could create an OpenATV 7.6 USB image in NFI format, I would be very grateful. Thank you...