SAB amiko Alien 2 help please

Quote from Julesd

Happy new year everyone!

I am trying to get my SAB Unix triple HD box working again.

I am really struggling with this. i am trying to reflash but whatever software I try it won't seem to install.

It now won't do anything. Just stays at load 49.

Can anyone help me recover it please?

Thanks.

Regards,

Jules.

Display More

Go back to my topic in the forum below

Thread

Method of passing the rescue-image​​ for Spark devices using Cisco TFTP Server

linuxsat-support.com/cms/attachment/139070/







Method of passing the rescue-image for Spark devices using Cisco TFTP Server



In some cases Spark devices not accept soft rescue in by usb

Most of the problems of not accepting the rescue-image will be a defect from the usb that the device cannot read from
So we will use passing the rescue-image for Spark devices using Cisco TFTP Server



We connect the computer with the receiver with a regular Ethernet network cord














Then we enter the network settings into…

ahmed gazye

Mar 15th 2020

Use rescue-image from my topic below

Thread

Golden Media ONE Triplex Spark sti 7162 Rescue Image 1.2.65

GM_Spark_ONE_Triplex_Rescue-image_1.2.65 for sti 7162









First, remove any external flash that is installed on the device

Second, start with this solution and implement what is contained in it
Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you Click on the channel buttons next to it until the…

ahmed gazye

Mar 7th 2020

or my topic below

Thread

Amiko Alien 2 spark sti 7162 rescue image v1.2.65

spark_rescue_image_Amiko_Alien2_v1.2.65 for sti 7162








First, remove any external flash that is installed on the device

Second, start with this solution and implement what is contained in it
Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you Click on the channel buttons next to it until the word…

ahmed gazye

Mar 7th 2020

the following Important note :

For processor spark sti7162

There are two conversion groups and each group accepts the transfer only for itself

The first group :

Galaxy Innovations Avatar 2+ Avatar 3 * Visionnet Falcon * Icecrypt S3700 CHD * Truman Top Box 2 Tuners * Samsat Linux 2 * Dynavision 7162 * Superbox Z500 * Sogno Spark Triple

the second group:

* Golden Media Spark Triplex * Golden Media Spark One

* SAB Unix Triple HD * Amiko Alien 2 * Startrack SRT 2020 HD Plus