OScamicam_117xx_Vx_Vx_kitte888_Vx_Revision_All ipk & Settings- Not for UK

Quote from kitte888

So it works perfectly, I once had the error that an old one was installed, but I couldn't understand it anymore, they check a few things when installing

i have the same issues as sety ...

first i had installed the "wrong" pkg as i found in the Folder Oscam "... oscam for all 1.4"

after removing this and restarting copied the correct ipk to tmp (enigma2-plugin-softcams-oscamicamnew_11777-ICAMEMU-Kitte888-V4Rev_all.ipk)

as suggested above, i installed it about ipk-Installer menue but it ends with the message "no CPU Found" and the error

root@vuduo2:/tmp# opkg install enigma2-plugin-softcams-oscamicamnew_11777-ICAMEMU-Kitte888-V4Rev_all.ipk

Installing enigma2-plugin-softcams-oscamicamnew (11777-ICAMEMU-Kitte888) on root.

Configuring enigma2-plugin-softcams-oscamicamnew.

* pkg_run_script: package "enigma2-plugin-softcams-oscamicamnew" postinst script returned status 4.

* opkg_configure: enigma2-plugin-softcams-oscamicamnew.postinst returned 4.

so what i have to do ?? please

mySytem:
VU+Duo²
OpenATV 7.4
mipsel CPU




i found the postinstall log which shows:

***********************************************************

* Kitte888 postinstall *

* *

***********************************************************

IcamV9-Ton-BufferV3-Demuxer-err-V8

//var/lib/opkg/info/enigma2-plugin-softcams-oscamicamnew.postinst: Zeile 94: /usr/kitte888/install/check/cpu.txt: No such file or directory

file ist nicht da

************************ suchen cpu ***************************

Sorry, your Device does not have the proper Emu

--2024-05-10 11:11:38-- http://localhost/web/message?t…u+found&type=2&timeout=10

Resolving localhost... ::1, 127.0.0.1

Connecting to localhost|::1|:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: unspecified [text/xml]

Saving to: ‘-q’

0K 1,42M=0s

2024-05-10 11:11:38 (1,42 MB/s) - ‘-q’ saved [167]

which image which box
does the oscam webif work?
I've seen that the message no cpu comes up in openatv with other IPKs too

There is more information coming, cpu found, image name etc
what does he say?

i posted it !...

mySytem:

VU+Duo²

OpenATV 7.4

mipsel CPU

When you install it what messages come up

How to solve oscam problem to install in VU+ Zero 4k operating system Black hole

i wrote it:

"no CPU found"

and the log is also attached

as suggested above, i installed it about ipk-Installer menue but it ends with the message "no CPU Found" and the error

I had already told him that there were still leftovers and that the installers weren't doing something right

cleanly uninstall and delete everything

I looked at it again, it works

If you do that in the putty, what comes out?

uname -m > $CHECK

-------------------------------------------------- ------------------------------------------------

I did something for openblackhole, what shouldn't work

hope I found it
you install it via putty with status 4 error
But all the messages come on the TV and the Oscam is installed
If you want to install again via blue, no CPU comes

So plugin removed again and went straight to blue

and goes

so i deleted all depniding on any softcam and restarted...

Then i installed yout ipk via putty and this is what was reported

root@vuduo2:/tmp# opkg install enigma2-plugin-softcams-oscamicamnew_11777-ICAMEMU-Kitte888-V4Rev_all.ipk

Installing enigma2-plugin-softcams-oscamicamnew (11777-ICAMEMU-Kitte888) on root.

Configuring enigma2-plugin-softcams-oscamicamnew.

* pkg_run_script: package "enigma2-plugin-softcams-oscamicamnew" postinst script returned status 4.

* opkg_configure: enigma2-plugin-softcams-oscamicamnew.postinst returned 4.

root@vuduo2:/tmp# uname -m > $CHECK

-bash: $CHECK: ambiguous redirect

root@vuduo2:/tmp#

but binary "oscamicamnew" is created and able to be started....

as well with the folder "oscamicamnew" in /etc/tuxbox/config....

and the WebIf is very colourful and semms that is yours .... :-)

so i will give it a try...
but later... now i have to be busy : :-D

why always with putty?

Simply copy it into the tmp and use blue to use the ipk installer

You told!.

@Kitte

I have a cleanly reinstalled ATV 7.4. Without any other plugin.

I installed your 11777 and there was also the message “No CPU found”. The installation went without any problems and the Oscam also runs perfectly. Today I updated ATV 7.4, which was offered to me. And during installation the message “No CPU found” came up. However, the installation was completed without errors. And everything works.

Let's see. Want to test something again.

Test done.

I have now made an update to my cleanly installed atv 7.4, which was offered to me. With this update the message “No CPU found” did not appear. I don't have Oscam installed either. So the message about the CPU must come from your 11777 installations .ipk. The window that displays the message is also your style from your installation routine.

LG Hoffi

If it comes from me nothing is installed
because then I don't know which CPU I have to install
no cpu comes when the installer sees that it is already there and aborts the installation
I'll catch that up
But if everything is installed, it's not mine
I've also seen no cpu in other plugins that aren't mine

kitte888

so i finished my clean installation of your package and added just the information of the readers...

But i got i lot of interruptions during the viewing...
every (about) 7 secs i have a fallout of 3-4 secs. (sometimes it runs longer) but then fallout again...

can you help me to determine where i can fix in the settings this fallouts ??
i have just changed the entries in the oscam.server and the port adress and allowed clients in the global oscam.conf

here is one entry of 7 in oscam.server

[reader]

label = icam7

enable = 1

protocol = cccam_mcs

device = humdum.net,17000

user =itsmeornot

password = YouKnow

inactivitytimeout = 30

group = 1

cccversion = 2.1.1

ccckeepalive = 1

audisabled = 1

[reader]

label = emulator

enable = 0

protocol = emu

device = emulator

device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key

caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

detect = cd

ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

group = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE

and attached is a cutout of my log

log (1).txt

thanks for any hints

That sounds like a provider
post a log file

testline

Is attached above "log(1).txt

here the new oscam no more status 4 and also no cpu fixed

Oscam mit scripts und Oscamforall neu Variante - German - Linux Satellite Support Community (linuxsat-support.com)

The answers are always there, so the picture stands for about 5-6 seconds
This is called fake ECM, it's up to the provider
Have you ever gotten a Tesline to compare?

Where i can See That??

Could you explain That fake ECM?

Thks

I'v got one, but this worked fine..

So i will ask them...

You can tell that an answer has come but it doesn't make the picture bright
So about 5-6 seconds until the next one comes, the picture stands