when recording via Terrestrial DVB-T2 and two TV programs simultaneously then but playing recording 1 works fine but recording no. 2 is just a black scene it plays for about 2 seconds then stops but plays
Black hole seems really stable
but cannot avoid mistakes either
it's fun to be a part of discovering that mistakes become right
Image .. No
E2 update online (Yes) Always. Five hours ago there was an update online
if I can I'll give you a little help...!!!, to record on 2 different satellites it works you must have LNB 2 or 4 and the 2 cables connected to the two respective cables to the two tuners of the decoder only in this way it works and if you have DTT it just tested with OpenPli I record on satellite and then I go to watch the same program on DTT or I watch another channel and with the Player checked and it works at 100x100.
if I can I'll give you a little help...!!!, to record on 2 different satellites it works you must have LNB 2 or 4 and the 2 cables connected to the two respective cables to the two tuners of the decoder only in this way it works and if you have DTT it just tested with OpenPli I record on satellite and then I go to watch the same program on DTT or I watch another channel and with the Player checked and it works at 100x1
use Terrestrial DVB-T2 not satellites it is not together
Hi fairbird. I can not add any things manually ... Should be add in with build image.
If the skin have source it is ok I can add it in feed files with building feed image.
I found it on oe-alliance .. I will test it and then maybe I will add it on feed
Hi fairbird. Congrats on the nice image and your work in general I saw one option that doesn't work on any version of the black hole image. When you enter with the green button at all satellites and select a satellite and then select, for example, a channel starting with the letter S and press the number 7 on the remote 4 times, it does not go to that channel and does not respond at all. To go to this channel you have to go through all the other channels and this unnecessarily slows down the whole procedure. I hope you understand me and you will fix this non-working option that works for every other image. You can release the fix as an update or directly release a new version.
Hi fairbird. Congrats on the nice image and your work in general I saw one option that doesn't work on any version of the black hole image. When you enter with the green button at all satellites and select a satellite and then select, for example, a channel starting with the letter S and press the number 7 on the remote 4 times, it does not go to that channel and does not respond at all. To go to this channel you have to go through all the other channels and this unnecessarily slows down the whole procedure. I hope you understand me and you will fix this non-working option that works for every other image. You can release the fix as an update or directly release a new version.
The Default settings for channels list numbers is for Epg panel feature. and you can change it in.
Press Blue Button > Red Button (Epg Settings) > Red Button (Global Settings) > and disable (Enable Epg Buttons in channel list)
But there is crash if you using numbers in channel list I will fix it in next online update.
there are no better images than Black hole 10.5
keep up the good work fairbird
p.s. wooks you on new update
When you got the crash ?! After open which option ?!!
Ok, firebird, I'm currently using version 10.3, I'll wait for the update that will stop the crash. You can write when the update comes out so I can test and write if there is a change. Greetings!
Hello , I have a dreambox 920 and I installed the great Black Hole 10.5 , but unfortunately after a while it showed me a green screen and a software problém , you don’t know what I’m doing?
Ok, firebird, I'm currently using version 10.3, I'll wait for the update that will stop the crash. You can write when the update comes out so I can test and write if there is a change. Greetings!
you can safely download Black Hole10.5
Run yourself with 10.5
now remember that from the very beginning it is not recommended to update online to 10.5
Hello , I have a dreambox 920 and I installed the great Black Hole 10.5 , but unfortunately after a while it showed me a green screen and a software problém , you don’t know what I’m doing?
have you installed skins that do not support Black Hole??
I left the iFlatFHD skin already installed. Before that I was using Black Hole 9.9 and no problem. It only happened after a clean install of 10.5.
Ok, firebird, I'm currently using version 10.3, I'll wait for the update that will stop the crash. You can write when the update comes out so I can test and write if there is a change. Greetings!
in old version should be no crashing ... But no support for old version image the support just for latest version
Don’t have an account yet? Register yourself now and be a part of our community!
