Display More??
start putty and connect to your box
init 4
opkg update
opkg install socketdaemon
putty not close the window
Of course it happens putty closes on its own telnet no longer works and I have to restart the box from behind
There are 734 replies in this Thread which was already clicked 111,352 times. The last Post () by Mahmoud Hussein.
Display More??
start putty and connect to your box
init 4
opkg update
opkg install socketdaemon
putty not close the window
Of course it happens putty closes on its own telnet no longer works and I have to restart the box from behind
Of course it happens putty closes on its own telnet no longer works and I have to restart the box from behind
The same problem after last update
i have not received any useful information from you
do you have the software installed or not?
install socketdaemon ?
opkg install socketdaemon
and sockeddaemon is running
check with ps -aux
Octagon 8008
socketdaemon installed
socketdaemon is running
Screenshot 2023-11-24 115618.png
opkg upgrade
Screenshot 2023-11-24 115656.png
a telnet connection is closes
reconnecting to the box via telnet is no longer possible
Screenshot 2023-11-24 115718.png
The connection via putty (ssh) is functional and the opkg upgrade command also goes through it without problems and even.
After the restart, the telnet connection is of course fully functional again.
Update devel und 7.3
* CI fix VU FBC Tuner 9-16
* CI fix decrambler issue ci 1.4
no telnet you mean port 23
use port 22 ssh to connect with putty
to use insecure telnet port 23 set first a password
Display Moreno telnet you mean port 23
use port 22 ssh to connect with putty
to use insecure telnet port 23 set first a password
niether 22 nor 23 ports don`t working with putty connections
WinScp with SPFTP 22 port working
password is created at first
before update everything was OK
here all working np i use uclan pro too
you use correct ip , check hdcp sometime box get a new ip from router
ip of STB is not DHCP
i try to reload system to new one and see will it work ?
Update devel
[ChannelSelection]
* try to fix grayed out services while stream relay active
[International.py] Correct keyboard index definition
StreamRelay (#3153)
* add zap delay if stream relay active to prevent "no free tuner".
* show correct provider, namespace, transponder and frontend info for stream relay services
* show recording indicator in channel selection for stream relay services
PLEASE NOTE!!
All of this will only work if you use whitelist_streamrelay.
[StreamRelay]
* improve isPlayable in ChannelSelection
[Navigation]
* disable Streamrelay zap delay
This needs to be implemented differently.
Automate and enhance keyboard keymap selection Automate and enhance keyboard keymap selection [InputDevice.py] - Refactor the Keyboard class. - Use "keyboards.xml" rather than separate "*.info" text files to describe the keymaps. - Sort imports. - Use join rather than string manipulation to create pathnames. - Use consistent quotation marks. - Use f-strings. - Clean up a few comments. [InputDeviceSetup.py] - Add "KeyboardSelection" class to handle keymap selection. - Remove redundant "layoutFinished()" method. - Sort imports. - Use consistent quotation marks. - Use f-strings. - Clean up a few comments. [keymaps] - Use more logical naming for keymaps. The names directly map to the keyboard field in the "International.py" data. - Remove all the "*.info" files and use a single "keyboards.xml" file instead. [menu.xml] - Update the "Keyboard Settings" menu item to use the new validation code. [setup.xml] - Update the "Keyboard" config item to use the new setting. [StartEnigma.py] - Remove defunct keyboard code
Update devel
hello Captain
could you able to look at problem with HDMI-CEC on VUZero4K, please
HDMI-CEC - activate; have problem with volume button "on satellite remote controle" volume up/down only working max. 1 hour or will stop work early when first restart enigma ( like will happend after installing plugins) ; found if i do full reboot STB, botton will worki again, just for 1 hour or som. This problemare ongoing from ATV 6.4; ATV 7.1; ATV 7.2; ATV 7.3 and develop as well.
over 2 week i testing open black hole 5.3.011 and here this problem does not exist
image OBH 5.3.011 - no problem with "volume button" you can resting enigama or rebooting stb alwys working corectlly
Have installing only OBH -no activate slotes for other image
thank you for help
possible create a full log, i cant test cec with my lg cec not working
* add zap delay if stream relay active to prevent "no free tuner".
Different boxes/tuners may have to adjust delay in the Navigation.py
possible create a full log, i cant test cec with my lg cec not working
please see cec-log from OBH
Some plugins don't seem to be updating
ATV 7.4 Dev level 20231126
1_0_19_1481_7E8_2_11A0000_0_0_0_20231127001839.jpg
Lasted git tags https://github.com/kiddac/XStreamity/tags
Sundtek Control Center doesn't seem to be showing in extensions. I managed to install the drivers by a settings backup https://github.com/oe-alliance…center_20210624-2_all.ipk
which box does not have the correct feed?
ok i found the rebuild issue oe.core gittag have a bug
old version has a higher number which prevents the rebuild, needs further investigation
feed issue fixed, next image updates feed and plugins ok
Will openAtv 7.3 support the hbbtv-webkit plugin on the AX 4K-BOX HD51?
Don’t have an account yet? Register yourself now and be a part of our community!