MultiStalker Pro - discussion & support

Quote from HU_Men

Quote from pascal46

is there a deb version?

Post

RE: MultiStalker Pro - discussion & support

@amirsaman

Gemin 4.2 For DM920


Decompress the files and send it to the path shown

(Code, 1 line)

stalker.conf to :

(Code, 1 line)

linuxsat-support.com/cms/attachment/273463/
linuxsat-support.com/cms/attachment/273464/

linuxsat-support.com/cms/attachment/273465/

linuxsat-support.com/cms/attachment/273466/

HU_Men

Jul 18th 2024

Pro is not available yet?

impossible install in opanatv 7.5 and ocatagon sf8008 4k

Quote from chepor

impossible install in opanatv 7.5 and ocatagon sf8008 4k

I do not believe. where is the confirmation of your words? where is the installation log or at least screenshots?

so for you, also see my post there is a link to the installation package.everything is set by the installation log under the spoiler..Good luck!!!!

Post

RE: MultiStalker Pro - discussion & support

(Quote from StartOver)

Brother, I installed a package from this post, here are screenshots from octagon8008 -Uclan ustym 4k is an octagon clone -there are no problems with the plugin. The only thing is that the skin must be full hd, otherwise it will give an error.After changing the skin, everything is fine..Good luck!!!
linuxsat-support.com/thread/?postID=811501#post811501

hecha71

Jul 25th 2024

695-r0_all.ipk'.

* opkg_solver_install: Cannot install package /tmp/enigma2-plugin-extensions-m

lti-stalkerpro_1.2+git169+1f4c695-r0_all.ipk.

whre is ms pro plugging?

Stop writing nonsense !

1.jpg    2.jpg

3.jpg    4.jpg

chepor - Download and install the package from the attachment

Quote from chepor

695-r0_all.ipk'.

* opkg_solver_install: Cannot install package /tmp/enigma2-plugin-extensions-m

lti-stalkerpro_1.2+git169+1f4c695-r0_all.ipk.

whre is ms pro plugging?

You don't want to read or do it right, that's your problem.

place the package in the tmp folder, and give commands from telnet

opkg update

opkg install /tmp/*.ipk

Do you see the difference in the package names?

enigma2-plugin-extensions-multi-stalkerpro_1.2+git98+f8a2afa0+f8a2afacb3-r0_all.ipk

Post

RE: MultiStalker Pro - discussion & support

(Quote from xyips32)

try this version
work perfect

(Code, 58 lines)


linuxsat-support.com/cms/attachment/274556/

linuxsat-support.com/cms/attachment/274557/

linuxsat-support.com/cms/attachment/274558/

HU_Men

Jul 23rd 2024

I installed OpenATV 7.5 via USB the first few days this version came out and the installtion went normally.

At the time, some plugins didn't work, such as wireguard, but MultiStalkerPro always worked well, in the meantime, with the updates that are coming out, everything works normally.

I have one box Octagon SF 8008 4K, currently have OpenATV 7.4 and 7.5 installed in my box and they both work very well.

And there is no need to ignore the dependencies because Multistalkerpro installs very well by IPK using AJPanel.

With DCC we place the IPK file in the temp folder and then with AJPanel we install it and everything goes well.

The correct version of Multistalkerpro for Octagon SF 8008 is: enigma2-plugin-extensions-multi-stalkerpro_1.2+git98+f8a2afa0+f8a2afacb3-r0_all

I never lie:

pasted-from-clipboard.png

Quote from chepor

I never lie:

pasted-from-clipboard.png

Install with DCC/AJPanel!

With DCC we place the IPK file in the temp folder and then with AJPanel we install it and everything goes well.

First of all, use the classic command – opkg remove and the name of the plugin – to uninstall the version you have now

opkg remove enigma2-plugin-extensions-multi-stalkerpro

and then install the version I sent you

Quote from chepor

I never lie:

opkg install /tmp/*.ipk

you can use that one

or

opkg install --force-depends /tmp/*.ipk

it's not a science, it's all classic basic commands.

Well, nothing, I'm going to have dinner and then stretch out on the bed to watch the TV.

Good luck with your work.

thsnks a lot, I reinstall the image, but it´s impossible to isntall

Quote from Warder

opkg install --force-depends /tmp/*.ipk

if you open the package and look at the control file, it's all written there, and if the feed works, then all dependencies will be installed automatically with the standard opkg install /tmp/*.ipk command, everything can be seen from the installation log in my post above -open the spoiler.

Although look here

But it is correct to first give the command to update the packages of the opkg update feed and only then to install the plugin..Good luck to you, and don't overdo it with food. ))))

28.07. MultiStalkerPro 1.2. json UPDATE

Quote from chepor

I never lie:

pasted-from-clipboard.png

Not downgrading package enigma2-plugin-extensions-multi-stalkerpro

The message says that you have the plugin installed and you cannot install a version lower than this version.

Press the green button, then the red button, then package extensions. Delete the plugin and restart the device. Then reinstall the version attached by my brother @hecha71, and the problem will be solved for you.

is insatlled by this command:

wget https://raw.githubusercontent.…lkerpro/main/installer.sh -O - | /bin/sh

the problem is on the correct portal.

I need the correct MultiStalkerPro.json file.

thanks a lot

can´t connect to the portal

Quote from chepor

is insatlled by this command:

wget https://raw.githubusercontent.…lkerpro/main/installer.sh -O - | /bin/sh

the problem is on the correct portal.

I need the correct MultiStalkerPro.json file.

thanks a lot

can´t connect to the portal

Display More

Put the IP on the browser and enter the portal in a very easy way

http://192.168.x.x/multi-stalkerpro/portals

etc/enigma2/

not are portals in your file!

not works