Quote from biko

Quote from Oberdan

Can anyone tell me why a portal works perfectly but the streaming stops systematically after a minute? If I change the channel and immediately return to the one I was watching, the broadcast resumes and stops after a minute. Does it depend on the portal or something else?

try to use same portal on ajpanel and use auto refresh function and see if that issue are solved

I installed ajpanel and everything works fine but the defect remains. I have auto refresh and every 30-45 sec the screen goes black, the refresh starts and a second later the image starts again and so on all the channels in the playlist. What can I do?

Quote from saalty

Hi all,

I have Ab PULSe 4k receiver with OpenATV 7.5.1. Normally display on the front of the recevier shows the actual time, but when I running Multistalker Pro it shows elapsed time since actual channel started. Is it possible to change to show the actual time instead of elapsed? I did not find any settings regarding this in Multistalker Pro, also I don't know is it plugin or enigma2 thing.

everything ok for me Atv7.5.1

2.jpg 1.jpg

Quote from Oberdan

I installed ajpanel and everything works fine but the defect remains. I have auto refresh and every 30-45 sec the screen goes black, the refresh starts and a second later the image starts again and so on all the channels in the playlist. What can I do?

you mean you have same issue you faced when you use ajpanel by 3 type of refresh too !!

then your server or image used have issue not the plugin

Quote from Saraceno84

Quote from saalty

Hi all,

I have Ab PULSe 4k receiver with OpenATV 7.5.1. Normally display on the front of the recevier shows the actual time, but when I running Multistalker Pro it shows elapsed time since actual channel started. Is it possible to change to show the actual time instead of elapsed? I did not find any settings regarding this in Multistalker Pro, also I don't know is it plugin or enigma2 thing.

everything ok for me Atv7.5.1

2.jpg 1.jpg

I meant front display of my AB PULSe receiver

Will this plugin not be released for Dream OS (OE2.5 & OE2.6)?

Hi, I have a problem and I can't find the solution

when i connect to http://XXX.XXX.XXX.XXX/multi-stalkerpro via my browser, i get the following error message since 3 days

I don't understand, because it worked before and I didn't modify anything

Method Not Allowed

Your browser approached me (at /multi-stalkerpro) with the method “GET”. I only allow the method HEAD here.

I use VU+ Solo SE: OpenPLi 8.xStar 20240930 GSt 1.20.5

thanks

Hello everyone,

I have a VU+ ZERO 4K with OPENATV 7.5.1 which works very well.

I want to play VOD streams, by opening the list of VOD favorites and clicking OK the movie starts but I only have the option

to stop reading.

Multistalker 1.2 works very well with different servers included in my image.

My question is, how to enter the Xstream information (server name, id and password) in MultiStalker 1.2 pro ?

I tried entering the codes under AJPanel - IPTV - Server Browse - MultistalkerPro.json by editing an Xstream server and then saving, but I don't see my changes under Portals Selection.

Thanks in advance for your help.

Sincerely

Bouteilles

Quote from biko

Quote from Oberdan

I installed ajpanel and everything works fine but the defect remains. I have auto refresh and every 30-45 sec the screen goes black, the refresh starts and a second later the image starts again and so on all the channels in the playlist. What can I do?

you mean you have same issue you faced when you use ajpanel by 3 type of refresh too !!

then your server or image used have issue not the plugin

You are right, I installed everything on OpenAtv 7.5 and everything works fine, no unwanted refresh. On OpenAtv 7.4 the defect to me remains. Thanks

Is it possible to insert subtitles in Ajpanel as well as it is possible to do in multistalker pro?

Quote from Bouteilles

Olá pessoal,

Tenho uma VU+ ZERO 4K com OPENATV 7.5.1 que funciona muito bem.

Quero reproduzir streams de VOD, abrindo a lista de favoritos de VOD e clicando em OK o filme começa mas só tenho a opção

para parar de ler.

O Multistalker 1.2 funciona muito bem com diferentes servidores incluídos na minha imagem.

Minha pergunta é: como inserir as informações do Xstream (nome do servidor, ID e senha) no MultiStalker 1.2 pro?

Tentei inserir os códigos em AJPanel - IPTV - Server Browse - MultistalkerPro.json editando um servidor Xstream e salvando, mas não vejo minhas alterações em Portals Selection.

Agradecemos antecipadamente pela sua ajuda.

Sinceramente

Bolos

Display More

Where it says mag,click there and choose m3u

Quote from Oberdan

Is it possible to insert subtitles in Ajpanel as well as it is possible to do in multistalker pro?

There are another topic about panal

Press on AJPanel to move to it

hello everyone, i have a problem. i installed the plugin on my zgemma h9.2h and inserted several portals in the Multistalker.json file in etc/enigma2 but from the plugin i don't see any portals. what am i doing wrong?

Tks

Hello,

Multi-stalker-pro works very well on my VU+ ZERO 4K, I was also able to enter my Xtream codes.

However, the search function always causes me to crash!

Is it the same for you? If not, how can I fix it?

Thanks in advance for your help

Michel

Quote from euvoso

i installed the plugin on my zgemma h9.2h

inserted several portals in the Multistalker.json file in etc/enigma2 but from the plugin

i don't see any portals. what am i doing wrong?

you must follow the criteria of json file as { [ ,

[
    {
        "tmdb_key": "xxxxxxx"
    },
    {
        "subdl_key": "xxxxxx"
    },
    {
        "host": "http://xxxx:80",
        "mac": "00:00:00:00:00:00",
        "type": 1
    },
    {
        "host": "http://xxxxxx",
        "username": "xxxx",
        "password": "xxx",
        "type": 2
    }
]

"tmdb_key": "xxxxxxx" for your privet key if you have registered and have one

"subdl_key": "xxxxxx" for your subdl subtitle key

"type": 1 for portal

"type": 2 for iptv playlist

Make sure your path on setting is default as etc/enigma2/MultiStalker Pro

Quote from Bouteilles

Hello,

Multi-stalker-pro works very well on my VU+ ZERO 4K, I was also able to enter my Xtream codes.

However, the search function always causes me to crash!

Is it the same for you? If not, how can I fix it?

Display More

No your problem are different

you have errors on image skin.py cause that

[Skin] Error: Component with name 'ErrorPixmap' was not found in skin of screen 'MessageBox'!
KeyError: 'QuestionPixmap'
[Skin] Error: Component with name 'QuestionPixmap' was not found in skin of screen 'MessageBox'!
KeyError: 'InfoPixmap'
[Skin] Error: Component with name 'InfoPixmap' was not found in skin of screen 'MessageBox'!
KeyError: 'WarningPixmap'
skin.SkinError: [Skin] Error: Component with name 'WarningPixmap' was not found in skin of screen 'MessageBox'!

Thanks for your answer, I changed the current Metrixfhd-neo skin to the MetrixHD skin and I also get a crash but this time the error is different !

I noticed a strange thing, let me explain: when you choose VOD, on the screen we have the movies and below we have 3 buttons, Add to Watchlist (BLUE) then Search (yellow) and finally Sort (blue).

At home, I often have only 2 buttons (green and blue) and sometimes green and yellow, but very rarely all 3 at the same time displayed on the screen!

It's really a shame that the function crashes my box...

Quote from Bouteilles

Thanks for your answer, I changed the current Metrixfhd-neo skin to the MetrixHD skin and I also get a crash but this time the error is different !

I noticed a strange thing, let me explain: when you choose VOD, on the screen we have the movies and below we have 3 buttons, Add to Watchlist (BLUE) then Search (yellow) and finally Sort (blue).

At home, I often have only 2 buttons (green and blue) and sometimes green and yellow, but very rarely all 3 at the same time displayed on the screen!

It's really a shame that the function crashes my box...

Display More

your crash log have error

File "git/src/MultiStalkerPro/MultiStalkerProSearch.py", line 184, in MultiStalkerPro.MultiStalkerProSearch.MultiStalkerProSearch.toggleKeyboard
KeyError: 'actions'
[ePyObject] (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap object at 0xab90fd80>>,('MultiStalkerProActions', 'yellow')) failed)

i have same stb and opatv 7.5.1 and i haven't that issues

try other skin to see what happened !!!

first i wanted to thank you for your help. what skin are you using with your image?

Can i add more Mac id? And How can i do?

Tks

just updated to openatv 7.5.1 - installed multi-stalkerpro 1.1

enigma2-plugin-extensions-multi-stalkerpro - 1.1+git84+c8b07cc0+c8b07cca97-r0 - enigma2-plugin-extensions-multi-stalkerpro version 1.1+git-r0

but can't seem to access the web portal - 192.168.xx.xx/multi-stalkerpro/portals - i get an error

Error 404: Not found

The requested page doesn't exist.

also tried various 1.2 as well but got the same message - box is MIPS - zgemma H5.2S

Same here but I have version 1.2 and the web page gives the same 404 error with ATV 7.5.1, since a couple of days ago it was ok and on ATV 7.5 it keeps working fine.

roadkiller83 , are you sure version 1.1 uses the multi-stalkerpro portal web page? I don't think so.