hello
i have this OSCam: 1.20_svn Build: r11726-799 Compiler: arm_cak7-icam_(samur) on the receiver but the 183E does not update
if i go to linissatpanel and do emm update it does and it also tells me card update but it does not open
should i update the bin or should i do something else
pastbin and the new one
are you sure the pastebin has been updated??
hello yes the pastebin is the new
hello yes the pastebin is the new
maybe i wasn't clear, the pastebin can be new, but if the update emm is old, your card will never update, so take the emm and try to send it manually.
buongiorno, scusa l'ignoranza come si aggiorna il pastebin.grazie openATV 7.4
buongiorno, scusa l'ignoranza come si aggiorna il pastebin.grazie openATV 7.4
Sorry but I see that there is a bit of confusion, a pastebin is nothing more than a web space, where you can insert information, and therefore a link, the pastebin is updated by whoever owns the web space.
Scusate ma vedo che c'è un po di confusione, un pastebin non è altro che uno spazio web, dove si possono inserire delle informazioni, e quindi un link, il pastebin viene aggiornato da chi detiene lo spazio web.
hello
i have this OSCam: 1.20_svn Build: r11726-799 Compiler: arm_cak7-icam_(samur) on the receiver but the 183E does not update
if i go to linissatpanel and do emm update it does and it also tells me card update but it does not open
should i update the bin or should i do something else
pastbin and the new one
Is this an Oscam version with http/https support where you can enter a URL that shares the current HW_emm?
hello
yes i but the pastebin in the webinf but nothing
I give up!!!
yes i but the pastebin in the webinf but nothing
is the answer to #969 ?
show your reader "oscam.server" via PN with the pastebin url you use - then I can tell you if the HW_emm is up to date
If you have a working wecam CI module and card on your enigma2 MIPS device, how could you read from the same device the updated emm without any additional hardware?
sorry, m
sorry, maybe a bit stupid question if on an enigma2 decoder with slot for interface module in the server the configuration should be as it should be to read a tivusat gold card. thanks for any infoaybe a bit stupid question if on an enigma2 decoder with slot for interface module in the server the configuration should be as it should be to read a tivusat gold card. thanks for any info
scusate una domanda forse un po stupida se su un decoder enigma2 con slot per modulo interface nel server la configurazione come dovrebbe essere per far leggere una carta tivusat gold.grazie per ogni info
read on the first page there is all the info... strange that you only read the last one... you don't do it like shrimp...🤭🤭😅
Italy
leggi in prima pagina ci sono tutte le info...strano che ai letto solo lultima...non si fa' come i gamberi...🤭🤭😅
be careful in this section only english is used
fai attenzione in questa sezione si usa solamente l'inglese
If you have a working wecam CI module and card on your enigma2 MIPS device, how could you read from the same device the updated emm without any additional hardware?
sure if you have certified hardware, it is clear that you have no problem, the card will be updated without any problem
certo se hai hardware certificato, è chiaro ch enon hai nessun problema, la scheda verrà aggiornata senza nessun problema
I would like to thank Samur and all member of forum for this OSCAM: with the last update my Octagon read again and update TVsat card! 
I would like to thank Samur and all member of forum for this OSCAM: with the last update my Octagon read again and update TVsat card!
Excellent work by samur, but remember that if you don't log in the emm, and then update the pastebin, your card will hardly have light.....
So hope that there is always someone who logs the emm......
Ottimo lavoro da parte samur, ma ricordati che se non si logga l emm, e quindi aggiornare il pastebin, difficilmente la tua scheda avrà luce....
Quindi spera che ci sia sempre qualcuno che logghi l emm.....
Display MoreI would like to thank Samur and all member of forum for this OSCAM: with the last update my Octagon read again and update TVsat card!
Excellent work by samur, but remember that if you don't log in the emm, and then update the pastebin, your card will hardly have light.....
So hope that there is always someone who logs the emm......
Ottimo lavoro da parte samur, ma ricordati che se non si logga l emm, e quindi aggiornare il pastebin, difficilmente la tua scheda avrà luce....
Quindi spera che ci sia sempre qualcuno che logghi l emm.....
Absolutely true, in fact I hope that those who extract the emm's will continue to "work" too 
If you have a working wecam CI module and card on your enigma2 MIPS device, how could you read from the same device the updated emm without any additional hardware?
sure if you have certified hardware, it is clear that you have no problem, the card will be updated without any problem
certo se hai hardware certificato, è chiaro ch enon hai nessun problema, la scheda verrà aggiornata senza nessun problema
sure, the card is updating over the cam, but where can I see the current emm in case I need it for my other card without the CI reader?
If you have a working wecam CI module and card on your enigma2 MIPS device, how could you read from the same device the updated emm without any additional hardware?
sure if you have certified hardware, it is clear that you have no problem, the card will be updated without any problem
certo se hai hardware certificato, è chiaro ch enon hai nessun problema, la scheda verrà aggiornata senza nessun problema
sure, the card is updating over the cam, but where can I see the current emm in case I need it for my other card without the CI reader?
nowhere, if you don't log with an additional hardware
Don’t have an account yet? Register yourself now and be a part of our community!
