Now, you can download emms from http and https pages
both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.
emm is only added to the card if your reader is : 183D or 183E,
users also can create there own "URL" example:
For rentry: emm_url = https://rentry.co/"xxxx"/raw
for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
#####
1)_Locally Activation (server side):
[reader]
label = Tivusat_183E
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 183E
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
emm_url = http/https://..................
emm_reload_minute = 10
detect = cd
mhz = 368
cardmhz = 368
nagra_read = 1
ident = 183E:000000,005411
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
auprovid = 005411
Display More
##
2)_ Remotely activation (client side):
clients (cccam, newcamd and camd3x) also can send the EMM to the server side,
[reader]
label = cccam_client
protocol = cccam
device = HOST,PORT
user = user
password = password
inactivitytimeout = 30
emm_url = http/https://...............
emm_reload_minute = 10
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
cccversion = 2.3.2
ccckeepalive = 1
Display More
emm_url: in the config, still working .
So, as we can see there are 2 ways for the EMM then we can let the classic config on the server side as before
and we use the second way (Remotely activation).
emm_reload_minute = , the default value is 0, so after the activation you can change the value to : 14400 (10 days)
the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 0 minutes
##
debug 64 for log parsing if you want to see details:
Or put in oscam.conf:
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11724-798
# Read more: https://svn.streamboard.tv/osc…on/doc/txt/oscam.conf.txt
[global]
logfile = /dev/null
initial_debuglevel = 64
...
..
.
#############
some fixes:
- emmcache can be added, this is also fixed.
- blockemm-x = x, enabled Or disabled the EMM is downloaded (you can block emms, but it still downloads...),
"saveemm-x" is not necessary,...
- emm_reload_minute = 0, means that it downloads once and not several times, and then maybe only downloads again when the oscam is restarted...
- emm_reload_minute = 5, writes it to the card every 5 minutes...
value between 5 and 20160, it will download and write to the card again after so many minutes, and now
the default value of emm_reload_minute is 0.
- the web interface counts the http emms .
########
In the case of the 183Ds, (here..!) configuration idea can also be used:
[reader]
...
caid = 183D
...
emm_url = http....
...
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
...
Good luck !
;