183D/183E EMM Activation via the http/https server with OSCam

There are 776 replies in this Thread which was already clicked 144,411 times. The last Post () by sodex.

    :New3:


    Now, you can download emms from http and https pages

    both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.


    emm is only added to the card if your reader is : 183D or 183E,

    users also can create there own "URL" example:

    For rentry: emm_url = https://rentry.co/"xxxx"/raw

    for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."

    #####

    1)_Locally Activation (server side):


    ##


    2)_ Remotely activation (client side):

    clients (cccam, newcamd and camd3x) also can send the EMM to the server side,

    emm_url: in the config, still working .


    So, as we can see there are 2 ways for the EMM then we can let the classic config on the server side as before

    and we use the second way (Remotely activation).


    emm_reload_minute = , the default value is 0, so after the activation you can change the value to : 14400 (10 days)

    2023-08-15 08-35-23.png


    the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 0 minutes

    ##

    debug 64 for log parsing if you want to see details:

    2023-08-13 16-10-00.png


    Or put in oscam.conf:

    #############

    some fixes:

    - emmcache can be added, this is also fixed.

    - blockemm-x = x, enabled Or disabled the EMM is downloaded (you can block emms, but it still downloads...),

    "saveemm-x" is not necessary,...

    - emm_reload_minute = 0, means that it downloads once and not several times, and then maybe only downloads again when the oscam is restarted...

    - emm_reload_minute = 5, writes it to the card every 5 minutes...

    value between 5 and 20160, it will download and write to the card again after so many minutes, and now

    the default value of emm_reload_minute is 0.


    - the web interface counts the http emms .

    ########

    In the case of the 183Ds, (here..!) configuration idea can also be used:




    Good luck !


    :firework:

    ;

  • Go to Best Answer

    hello samur

    but as you can see from the log I put above, on my drembox one (arch64 - libs...102), it didn't do its job, I set it to 2 minutes, brought the cart back and then deactivated it, I waited.. waited..waited.. still waiting :)


    this is my config:







    I hope this helps you as feedback


    :thank_you2:

    your config is bad .

    Quote from Lululla

    2023/08/17 18:45:26 357A4252 c (reader) TIVUSAT_HD [nagra] dvbapiau emmtype=global, len=142 (hex: 0x8E), idx=0, cnt=81: blocked (0 ms)

    you already blocked emm-g and you want to update it :head banger: ...!!!

    ###

    use my config from post #1 with my URL .

    and please, for all members read carefully and try to understand .

    everything is in the post #1

    the reload time, in minutes, can be freely selected (minimum 5, maximum 20160 minutes), default is 60 minutes

    if you enter a value under 5 minutes or above 20160 minutes then oscam will set the default value: 1 hour (60 minutes)


    emm_reload_minute = 10


    ;

    you're right, I didn't notice.

    Now I put your config.

    set to 10 minutes,

    but 15 have passed, unfortunately nothing..

    I'll try again to figure out what it could be, but I don't see any blocks in the log.

    Sorry, Samur, I read wrong!

    Now I have:

    ./osc@m: error while loading shared libraries: libpcsclite.so.1: cannot open shared object file: No such file or directory

    and I don't know where I could found this librarie.

    Osc@m server runs on Synology nas.

    I think it's necessary for me a version without pcsc or, better, with only smartreader as c@rdreader. Thanks.

    Edited 4 times, last by labionda ().

    i confirm, no work on my box

    notice..

    i flashed my dreambox

    I want to be a beta tester for this

    starting the oscam from telnet I get this error, if you have any suggestions as I have not found anything in the feeds


    Code
    root@dreambox:/usr/bin# ./oscam
./oscam: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory
    Quote from Lululla

    notice..

    i flashed my dreambox

    I want to be a beta tester for this

    starting the oscam from telnet I get this error, if you have any suggestions as I have not found anything in the feeds


    Code
    root@dreambox:/usr/bin# ./oscam
./oscam: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory

    You have to istall libusb- 1.0-0 or ask samur to compile with libreries. :winking face:

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login