MAC SCAN PYTHON WINDOWS - Discussion & Support

There are 5,279 replies in this Thread which was already clicked 581,170 times. The last Post () by thosch1973.

    Quote from madsykie

    HI Guys and Dolls , I made this script and cant seem to get any hits. Can someone help me as I am 73 years old and looking to keep my brain active


    file (3).py

    Hello madsykie You did a great job :) Well done. I took the liberty of making a small adjustment to your code so that it doesn't return a "200" status code for every response, as a working Stalker Portal should. I made the code simulate a request from a "TV receiver" to search for "all channels," and if it receives a response, it will save the data to a CSV file (provided that a file has been specified in advance). The change I made starts on line 41 to 104 ;)

    Quote from catzarov
    Quote from madsykie

    HI Guys and Dolls , I made this script and cant seem to get any hits. Can someone help me as I am 73 years old and looking to keep my brain active


    file (3).py

    Hello madsykie You did a great job :) Well done. I took the liberty of making a small adjustment to your code so that it doesn't return a "200" status code for every response, as a working Stalker Portal should. I made the code simulate a request from a "TV receiver" to search for "all channels," and if it receives a response, it will save the data to a CSV file (provided that a file has been specified in advance). The change I made starts on line 41 to 104 ;)

    Thanks for that, but I still cant get any hits. Did you get any hits?

    Quote from madsykie
    Quote from catzarov
    Quote from madsykie

    HI Guys and Dolls , I made this script and cant seem to get any hits. Can someone help me as I am 73 years old and looking to keep my brain active


    file (3).py

    Hello madsykie You did a great job :) Well done. I took the liberty of making a small adjustment to your code so that it doesn't return a "200" status code for every response, as a working Stalker Portal should. I made the code simulate a request from a "TV receiver" to search for "all channels," and if it receives a response, it will save the data to a CSV file (provided that a file has been specified in advance). The change I made starts on line 41 to 104 ;)

    Thanks for that, but I still cant get any hits. Did you get any hits?

    All my URLs show a 200 code, what does this code mean? And what should it be if there are matches?

    Hello, madsykie, DNV So far, I haven't found a match yet. Although the truth is that the code works very well-it scans about 10,000 ports in 10–15 minutes-I might rework it so it runs from a pre-prepared file containing MAC addresses. I’ll think about it over the next few days.

    Quote from catzarov

    Hello, madsykie, DNV So far, I haven't found a match yet. Although the truth is that the code works very well-it scans about 10,000 ports in 10–15 minutes-I might rework it so it runs from a pre-prepared file containing MAC addresses. I’ll think about it over the next few days.

    Hi, how do I turn off the sound when scanning? I hear Morse code. Where is it in the code to remove it? I have to turn the sound off completely. I'm trying the stationdjs version, which has a graphical interface.

    Quote from DNV
    Quote from catzarov

    Hello, madsykie, DNV So far, I haven't found a match yet. Although the truth is that the code works very well-it scans about 10,000 ports in 10–15 minutes-I might rework it so it runs from a pre-prepared file containing MAC addresses. I’ll think about it over the next few days.

    Hi, how do I turn off the sound when scanning? I hear Morse code. Where is it in the code to remove it? I have to turn the sound off completely. I'm trying the stationdjs version, which has a graphical interface.

    def play_beep():
        """Plays a short system beep (cross‑platform)."""
        try:
            if winsound:
                winsound.Beep(1000, 200)
            else:
                print("\a", end="", flush=True)
        except Exception:
            pass



    -----------------------------------------

    closed sound hits




    #def play_beep():
        #"""Plays a short system beep (cross‑platform)."""
        try:
            if winsound:
                winsound.Beep(1000, 200)
            else:
                print("\a", end="", flush=True)
        except Exception:
            pass

    Mac that doesn't work

    I think it is not suitable for use.

    I would also like to thank you for the program.


    Quote from yahsil

    hi i need this config

    It's probably a .py file that was converted from somewhere else, right?

    I scanned without using a proxy, so the proxy setting has disappeared from the menu.

    It is ☆FIXED_RIMI_LEGEND_M3U_ver²_POVERI☆_ENG_DUO



    ░█░░░█▀▀░█▀▀░█▀▀░█▀█░█▀▄░░

    ░█░░░█▀▀░█░█░█▀▀░█░█░█░█░░

    ░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀░░░


    🄼3🅄 🄻🄴🄶🄴🄽🄳 🄿🅁🄴🄼🄸🅄🄼


    Professional script by Rimi


    ☛ ᴘʏ ᴄᴏɴғɪɢ ʙʏ ʀɪᴍɪ ☚


    ╭─❪❪ 🄻🄴🄶🄴🄽🄳 ☛ 𝓡𝓲𝓶𝓲 ☚ 🅂🄲🄰🄽🄽🄴🅁 ❫❫

    │➪ Start Time➢ 03.17.2026 07:02

    │➪ Panel➢ 1tv41.icu:8080

    │➪ User:Pass➢ joaocarlos06:07981739

    │➪ Bot6 Total➢30348/33 Cpm➢229

    ╰─❫❫Scan Time➢07:03:22 Hit➢0 0.11%


    ★ ★ SCANNING ★ ★


    Hello - Sarote W Thailand 👑

    You have chosen 10 Bots

    Protocol:HTTP |404 404 200|

    Agent:ᴀᴜᴛᴏ-ᴀɢᴇɴᴛs

    Attack:Attack-Simple

    Sᴇʀᴠᴇʀ: 206.212.244.71 [United States 🇺🇸]

    Combo:30348 in Combo User_Pass Web.txt


    👺 🫅 🇭 🇮 🇹 🫅 👺


    If arranged in this format, Mac's Extractor will be able to create a combo list from it. To check if the Mac is correct.



    00:1A:79:D7:1D:FE

    00:1A:79:78:44:51

    00:1A:79:AC:D1:9E

    00:1A:79:EF:B9:DB

    00:1A:79:F8:0B:34

    00:1A:79:0A:20:FC

    00:1A:79:FB:26:F9

    00:1A:79:3D:BB:20

    00:1A:79:D3:01:E4

    00:1A:79:18:2F:68

    00:1A:79:DA:2A:C6

    00:1A:79:9B:FD:EA

    00:1A:79:17:CF:9E

    00:1A:79:E9:AB:43


Your hub for IPTV & streaming support.

Get help with Android apps, Smart TV setup, m3u playlists, channel lists, and finding reliable live streaming websites. Master IPTV streaming on all devices. Find downloads, setup tutorials, and community support for apps, Smart TVs, and m3u channel lists.