Download from the author's website -registration is needed
zukonmod-hyperion-9.3-zgemmah7-git32549-svn4713_recovery_emmc
zukonmod-hyperion-9.3-zgemmah7-git32549-svn4713_multi
Download from the author's website -registration is needed
zukonmod-hyperion-9.3-zgemmah7-git32549-svn4713_recovery_emmc
zukonmod-hyperion-9.3-zgemmah7-git32549-svn4713_multi
Why is registration necessary?
Why is registration necessary?
brother, if you follow the link in the first post of the topic, then you need to register to download the image, see the screenshots
these are not my rules, I did not set them, you can write to the author of this zukon image on his forum link in the first post.. good luck!!!
That is not true. Image is available on recovery mode for any supported STB. And is available without registration on my MEGA backup:
https://mega.nz/folder/tLYwSCwb#tRlNAq8R84mpLiQoiJxWFQ
This is no any new things ;)
Quello non è vero. L'immagine è disponibile in modalità di ripristino per qualsiasi STB supportato. Ed è disponibile senza registrazione sul mio MEGA backup:
https://mega.nz/folder/tLYwSCwb#tRlNAq8R84mpLiQoiJxWFQ
Questa non è una novità ;)
Thank you! :)
That is not true. Image is available on recovery mode for any supported STB. And is available without registration on my MEGA backup:
https://mega.nz/folder/tLYwSCwb#tRlNAq8R84mpLiQoiJxWFQ
This is no any new things ;)
dear I was not aware of your backup on the mega cloud.. and what is my wrong?, or is there something different in the screenshots?..you won't download it until you register..I'm not complaining about my eyesight yet
I changed access for non registered users to download on zukon.pl - now download should be possible for everyone.
I'm not a wizard ;) No one has reported this to me before.
IMO: download from recovery or from my MEGA mirror is beter option :D
I'm not a wizard ;)
wizard, wizard.. ,at least the images on my receivers (octagon8008 and zgemma7) created by you work magically, thank you for the good work!!! I have a question-request, can you compile an image for dreambox900-920?
No. I make images only for STB who I have. I don't have any Dreambox.
Hiperyon image 9.3 not support the wireguard 6.8 or 7.0 plugin version why?
Are you really using my image or do you want to add another image to multiboot? If you use I'll find time and fix it, but if you just collect images then there's no point in adding this because I'll just waste my time. . .
Are you really using my image or do you want to add another image to multiboot? If you use I'll find time and fix it, but if you just collect images then there's no point in adding this because I'll just waste my time. . .
Yes, I have your image installed.
With wireguard v._6.4 it works fine, if download version 6.8 give an error.
If I instal wireguard v._6.8 or 7.0 per ipk it also gives the error that you can see in the fhotos.
If I reinstall the image and do it all over again it still gives me this error.
OK, I know everything In line 176 and 177 is "something" that generating problem
Zrzut ekranu z 2023-12-18 22-02-01.png
You must asking madhouse to a little "fix" like:
And everything be working I checked
what is the default password for hyperion network 9.3 ?
what is the default password for hyperion network 9.3 ?
pkteam
I don't have any raytec multibox 4k. Without STB my support is not possible.
Is it possible for gigablue x3 4k?
Gigablue UE uhd 4k - yes. Other gigablue - no. Why? Because I don't have it and whithout stb I don't support. It is very simple.
Don’t have an account yet? Register yourself now and be a part of our community!