Panda555, i have done all that just like that! it doesnt help,i dont know what else to do! does vu zero 4k even can do this?
Panda555,sve sam uradio upravo tako! nije pomoglo,nenam sto jos mogu uraditi! moze li vu zero 4k uopce otvoriti ovo?
Panda555, i have done all that just like that! it doesnt help,i dont know what else to do! does vu zero 4k even can do this?
Panda555,sve sam uradio upravo tako! nije pomoglo,nenam sto jos mogu uraditi! moze li vu zero 4k uopce otvoriti ovo?
i gave just tried,command not work,no results
Zar taj paket nise ugasen na tom satelitu ??
iI have succeeded
i dont know is this command helped
/usr/bin/astra --pid /var/run/astra.pid /etc/astra/astra.conf &
but from that point its start to work!
THANKS TO ALLLLLL
Display MoreiI have succeeded
i dont know is this command helped
/usr/bin/astra --pid /var/run/astra.pid /etc/astra/astra.conf &
but from that point its start to work!
THANKS TO ALLLLLL
The result is that the astra process started and take a number , that is I want to see .
Enjoy .
Friends, the device I used is the dreambox 920 model.
By applying this process in OE 2.0 openatv software on this device, I can watch t2mi channels without any problems. However, I could not do it in OE 2.5 software. Can anyone tell me a method if anyone has tried it and made it work?
just folow mika post and you will resolve the problem!
now i have other problem! after every reboot of my box i need to put this command/usr/bin/astra --pid /var/run/astra.pid /etc/astra/astra.conf & to start astra ...is there any way that box start automaticly
now i have other problem! after every reboot of my box i need to put this command/usr/bin/astra --pid /var/run/astra.pid /etc/astra/astra.conf & to start astra ...is there any way that box start automaticly
/etc/init.d/astra-sm
be sure that this file is inplace
preko DCC programa možete sve ovo odraditi kako je navedeno u uputstvo od @ciepf.
držite se toga i mora raditi 100%.
through the DCC program you can do all this as stated in the instructions from @ciepf.
stick with it and it should work 100%.
pitanje glasi! koju frekvenciju koristite za ove BiH programe?
11444 H 17500 ili 11442 H 117500?
u ovom slućaju morate koristiti 11442 H 117500.
Znaći morate promjeniti postojeću frekvenciju u ovu 11442 H 117500 i napraviti pretragu. nakon završetka pretrage pojaviće se pid od jednog programa. i to je to. napravite reboot resivera i to je to
the question is! what frequency do you use for these BiH programs?
11444 H 17500 or 11442 H 117500?
in this case you must use 11442 H 117500.
You have to know, change the existing frequency to this 11442 H 117500 and do a search. after the end of the search, the pid of one program will appear. and that's it. reboot the receiver and that's it
iskreno mika ja sam samo listu ciefp ubacio i to je to
honestly mika i have just putt ciefp settings and thats it
Don’t have an account yet? Register yourself now and be a part of our community!