Hi all,
i use the new version on Merlin 5 image but i cant connect to openwebinf (FTP & Telnet works fine)
Do i need some config files for webinf?
Regards
PakTo
DM 900 Openwebinf problem
- PakTo
- Thread is marked as Resolved.
- Go to Best Answer
-
-
открытьwebinf
Чувак, что значит открытая веб-инф не работает, в другой теме я тебе давал скрины, где я установил чистый образ от 2024 02 11 - без проблем все работает.. Чего ты хочешь, я не понял? На картинке все работает
покажите мне хотя бы скрины или фото того, что у вас не работает..
-
to openwebinf
Dude, what do you mean by open web inf does not work, in another topic I gave you screenshots where I installed a clean image from 2024 02 21 -no problem everything works.. What do you want, I don't understand? Everything works in the image
Yes, not work
when i go to web browser (safari,firefox,chrome,etc) and put my box ip addresses not opening the webinf
-
when i go to web browser (safari,firefox,chrome,etc) and put my box ip addresses not opening the webinf
do you have the web interface enabled in your network settings?
-
when i go to web browser (safari,firefox,chrome,etc) and put my box ip addresses not opening the webinf
do you have the web interface enabled in your network settings?
Yes, that's correct
-
if you run oscam send us your oscam.config
-
if you run oscam send us your oscam.config
Its not works from beginning (clear soft = test = not work) without oscam installation
Regards
PakTo
-
try restart your router and reci and look again
-
try restart your router and reci and look again
Done few times.
Don't helps.
i try Lan connection with router. ( thinking router blok some port) i change connection for WLAN to my mobile hotspot and same effect.
Regards
PakTo
-
-
open dhcp in router
-
open dhcp in router
what exactly you mind ?
-
Open a web browser on a mobile device.
This will usually be in the "Network Settings" section (or your router page's equivalent).
If you can't find DHCP there, look for it in the "Advanced" settings, "Setup" settings, or "Local Network" settings. Enable DHCP.
Click the Enable switch, checkbox, or button.
-
Display More
Open a web browser on a mobile device.
This will usually be in the "Network Settings" section (or your router page's equivalent).
If you can't find DHCP there, look for it in the "Advanced" settings, "Setup" settings, or "Local Network" settings. Enable DHCP.
Click the Enable switch, checkbox, or button.
i have that option setup already
-
Your best bet is to reinstall the Merlin5 image. The first thing you would do is change the second image and try it, if it works, then there is something wrong with the Merlin5 image.
-
openwebinfo does not work for you only on the image of Merelin or on any image of dream OS ?
-
.It works for me, but I don't have a Merlin image, but another one
-
Your best bet is to reinstall the Merlin5 image. The first thing you would do is change the second image and try it, if it works, then there is something wrong with the Merlin5 image.
On fresh image not working ( clear new image without any softcam plugins etc )
Works on Open Atv
-
openwebinfo does not work for you only on the image of Merelin or on any image of dream OS ?
I’m not mention my box is clone version
-
Probably because it's a clone, it doesn't work properly
-
Firmware, downloads and support for Dreambox DM900 UltraHD.
Your community resource for the Dreambox DM900 UltraHD satellite receiver — firmware images, channel lists, plugins and setup help.
