i'm getting a blue screen when loading the nordvpn token. see log. what do to here?
[Plugin] WireGuard VPN by Madhouse
-
- Plugin Support
- madhouse
- Thread is marked as Resolved.
There are 1,092 replies in this Thread which was already clicked 230,072 times. The last Post () by robertjust.
-
-
Im not able to load the file...i change with filezilla but nothing..
-
Se qualcuno mi invia un token NordVpn in privato, posso aggiustarlo, dopo averlo aggiustato possono revocare il token.
Se qualcuno mi invia un token NordVpn in privato, posso aggiustarlo, dopo averlo aggiustato possono revocare il token
Im using fusion...and exactly vpn go...that's fine too?...i mean if its a valid alternative of wireguard...tnk
-
Strange...i installed wireguard VPN..but It appears missing module...what Is Telnet command to install the module?
-
Nothing to do.... for me doesn't work...i 'm not able to load token...
-
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
-
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
@ madhouse ,
Thanks
Connected nordvpn with token key on wireguard 10.1
-
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
Probably there a conflict..im using VPN go..with your plugin fusion...and so nord vpn works
-
Display More
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
@ madhouse ,
Thanks
Connected nordvpn with token key on wireguard 10.1
With which decoder and image?
-
Display MoreDisplay More
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
@ madhouse ,
Thanks
Connected nordvpn with token key on wireguard 10.1
With which decoder and image?
@ gigafox72 ,
Decoder = VU+ Uno 4k SE
Image = Open Atv 7.4
-
Display MoreDisplay More
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
@ madhouse ,
Thanks
Connected nordvpn with token key on wireguard 10.1
With which decoder and image?
If you want to use WireGuard, you must stop the server on VpnGoPro, you must remove openvpn, in the network settings of the box you must reset the gateway IP and enter the IP of your router.
It was written in the first post.
-
Display MoreDisplay MoreDisplay More
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
@ madhouse ,
Thanks
Connected nordvpn with token key on wireguard 10.1
With which decoder and image?
If you want to use WireGuard, you must stop the server on VpnGoPro, you must remove openvpn, in the network settings of the box you must reset the gateway IP and enter the IP of your router.
It was written in the first post.
sorry...but the gateway ip and ip for the router isnt the same?
-
Hi madhouse
thank you for plugin
have NordVPN with "privatekey.key" and work like sharm
now updating plugin to v10.1 and testing "wg_token" but still loading "private key" instead "wg_token"
i gues because we missing "wg_token" location
could you be able create saving location (...file director...) for "wg-token" too.
what are benefit to using token vs privetekey?
thank you
ATV7.3 from 28 May; Vu zero4K
-
regarding personal files (picture) for NordVPN
would like to have "shortcut" 3 servers
i copy file from folder
Code/etc/wireguard/wg0.confand move to
Code/media/hdd/WgConfigbut dont get wireguard connection, ip stay on my provider
could you advise where should find correct "setting" for it?
copies for "wg0.conf" looks like:
Thank you
Code
Display More# Script created by Madhouse [Interface] PrivateKey = XXX= Address = 10.5.0.2/32 DNS = 103.86.96.100, 103.86.99.100 # TUN WIREGUARD PostUp = ip route add 178.239.173.219 via 192.168.1.1 PostDown = ip route del 178.239.173.219 via 192.168.1.1 [Peer] PublicKey = XXXX= AllowedIps = 0.0.0.0/1,128.0.0.0/1 Endpoint = 178.239.173.219:51820 PersistentKeepalive = 25or have wrong setting in the plugin?
-
Display MoreDisplay MoreDisplay MoreDisplay More
Nothing to do.... for me doesn't work...i 'm not able to load token...
It's simple, copy your access token and paste/save in the wg_token.key file located in /etc, via the plugin in the settings, press the blue button (load your token).
hrvat Can confirm that it works.
Use the latest version 10.1
@ madhouse ,
Thanks
Connected nordvpn with token key on wireguard 10.1
With which decoder and image?
If you want to use WireGuard, you must stop the server on VpnGoPro, you must remove openvpn, in the network settings of the box you must reset the gateway IP and enter the IP of your router.
It was written in the first post.
sorry...but the gateway ip and ip for the router isnt the same?
Exactly, read what I wrote carefully, if you use VpnGoPro and would like to use WireGuard.
-
Egami Team Images based on OE-Alliance
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
