[Plugin] WireGuard VPN by Madhouse

Gigablue quad 4k pro openvix 6.7.017 wireguard installed all looks good to start with surfshark creds all loaded correctly , I see my lists of vpn servers Everyone I have tried always comes back with module is not loaded check wireguard is installed in image . tryed the telnet message to update it does do it but error module always returns . any ideas about how to fix pls .. Thanks

Hello Madhouse.. thanks for your work!

I have two boxes on a network. Both the VU+ Zero4K and the Octagon SF8008 4k UHD are running Openatv 7.5.1.

I can activate Mullvad on the Zero4k without any problems. However, when I try to activate the Mullvad server on the Octagon SF8008 with the same settings, it tries to connect, but nothing happens. Even when I try to connect to a different Mullvad server, it loads but doesn't connect.

Do you have any idea what I can do?

Thanks

3 of 5 that's not the problem, :/ Restarting the network doesn't work either. I'll flash a clean OpenAtv image tomorrow, maybe it helps.

Quote from madhouse

Update online WireGuard VPN V.15.8 (ipk on the first post)

* Fixed entering Mullvad's account via remote control.

* Fixed a boot error when the web interface is active.

* Fixed an error when generating .conf files for Cloudflare.

* Small graphic changes.

Display More

Hello,

Thx

There is no update for Python 3.9 ?

Quote from madhouse

Quote from Nominus

Hello Madhouse.. thanks for your work!

I have two boxes on a network. Both the VU+ Zero4K and the Octagon SF8008 4k UHD are running Openatv 7.5.1.

I can activate Mullvad on the Zero4k without any problems. However, when I try to activate the Mullvad server on the Octagon SF8008 with the same settings, it tries to connect, but nothing happens. Even when I try to connect to a different Mullvad server, it loads but doesn't connect.

Do you have any idea what I can do?

Thanks

Display More

Hi, have you checked how many private keys you've generated on your account?

Please note that you can create a maximum of 5 private keys for 5 devices.

Display More

Same Octagon SF 8008 4K decoder with OpenATV 7.5.1 image, it lets me load everything perfectly but it doesn't connect to any server...

Quote from Blazecat

Quote from salesp83

Buongiorno e complimenti per il lavoro svolto. Ho configurato correttamente un zgemma H7 con il tuo plugin su openatv 7.5

1 ed oscam e tutto funziona perfettamente, ma come provo a fare lo stesso su 2 zgemma H5 stessa immagina, una volta attivato il server (chiunque scelga), al riavvio va in blocco il decoder. Possibile incompatibilità? Decoder con poca memoria?

Ciao, in base all'immagine che usi, devi installare l'IPK per MIPS. H5 è un decoder MIPS, non ARM. Puoi trovare l'IPK nel primo post sia per PCON 3.12 che per 3.13. Cordiali saluti.

scrivere in inglese.

Ciao in base all'immagine che usi devi installare ipk x mips, h5 è un decoder mips ,non arm ,l'ipk lo trovi al primo post sia x puton 3.12 che 3.13. Saluti

E x cortesia scrivi in inglese.

Display More

Display More

Good morning, if the plugin is installed correctly and I configure all its functions, that means the IPK is correct, right? The problem is that once the server is started, the channels aren't visible, so I restart the decoder, and that's when everything crashes. Forgive my English, but I used Google Translate.

madhouse

A user on openatv is having problems with the server and

provider Mullvad.

Can you take a look?

Many thanks.

Foren-Übersicht

openATV Forum: Austausch über DVB, OpenATV-Images, Receiver-Konfigurationen, TV-Optimierung und Support. Treten Sie der Community bei!

www.opena.tv

Quote from Lippei

madhouse

A user on openatv is having problems with the server and

provider Mullvad.

Can you take a look?

Many thanks.

https://www.opena.tv/viewtopic…e2df13d67b2b12c32#p589496

Display More

43.jpg

44.jpg

Hi version 7.6 no problem with Mullvad

Quote from madhouse

* Currently supports the following images:
Egami, OpenAtv, OpenVix, PurE2, Openblackhole, OpenPLi, OpenHdf, OpenSpa, OpenDroid, NonSoloSat, CobraLiberoSat, SatDreamGr, OpenTr, TNAP, Corvoboys (python 3.9 - 3.12 - 3.13)

* Supports (for now) Surfshark, NordVpn, MullvadVpn, IVpn providers and personal files.

* Requires the Private Key issued by your vpn provider (downloadable via the provider's website)

* The Private key must be copied and pasted in the file located in /etc/Privatekey.key or /media/hdd/WgConfig/Privatekey.key or /media/usb/WgConfig/Privatekey.key

* To import the key you need to run Wireguard Vpn, green button (Settings) Blue button - Load Private Key

* If you want to use the bypass function, remember to save and then connect to a server.

INFO.

Wireguard Vpn plugin is not compatible with OpenVpn, if OpenVpn is running, you have to stop OpenVpn (if a startup setting is active at boot, you have to disable it), you have to reset the Gateway (router ip) in the network configurations.

WireGuard VPN requires dependencies that are installed by the plugin.

wireguard-tools - wireguard-tools-bash-completion - openresolv - kernel-module-wireguard - iptables (for the kill switch).

* [NordVpn] Retrieving the private key from nordlynx via access token (https://support.nordvpn.com/hc…ken-with-NordVPN-on-Linux)

* Small graphic changes.

If you get a crash while using it, post the crashlog FTP: /home/root/logs

home.jpg setting.jpg

dns.jpg wg_cloud.jpg

wg3.jpeg wg4.jpeg

Python 3.9 (ARM): https://github.com/m4dhouse/Wi…ireguard-vpn_15.4_all.ipk

Python 3.9 (ARM - Zgemma h82h): https://github.com/m4dhouse/Wi…ard-vpn-h82h_15.4_all.ipk

Python 3.12 (ARM): https://github.com/m4dhouse/Wi…ireguard-vpn_15.8_all.ipk

Python 3.12 (ARM - Zgemma h82h): https://github.com/m4dhouse/Wi…ard-vpn-h82h_15.8_all.ipk

Python 3.12 (AARCH64): https://github.com/m4dhouse/Wi…-vpn-aarch64_15.8_all.ipk

Python 3.12 (MIPSEL): https://github.com/m4dhouse/Wi…ard-vpn-mips_15.8_all.ipk

Python 3.13 (ARM): https://github.com/m4dhouse/Wi…ireguard-vpn_15.8_all.ipk

Python 3.13 (ARM - Zgemma h82h): https://github.com/m4dhouse/Wireguard-Vpn/raw/python-3.13/enigma2-plugin-extensions-wireguard-vpn-h82h_15.8_all.ipk

Python 3.13 (AARCH64): https://github.com/m4dhouse/Wi…-vpn-aarch64_15.8_all.ipk

Python 3.13 (MIPSEL): https://github.com/m4dhouse/Wi…ard-vpn-mips_15.8_all.ipk

Installation via telnet:

Code

wget -qO /tmp/WireGuard.sh "https://raw.githubusercontent.com/m4dhouse/Wireguard-Vpn/python-3.12/WireGuard.sh" && chmod 777 /tmp/WireGuard.sh && /tmp/WireGuard.sh

Display More

Hi MadHouse, which version should I use for OpenPli 9.1 on Zgemma H5?

I've tried everything but I can't. I find the files in the appropriate folders but the name does not appear among the plugins.
Thank you in advance for your help.
PS: with OPENATV 7.6 beta all ok

The script should install the correct version. Can you check the plugin browser on most images this is Menu, Plugins.

See if you receive any error and take a screenshot if it does.

Quote from dsayers

The script should install the correct version. Can you check the plugin browser on most images this is Menu, Plugins.

See if you receive any error and take a screenshot if it does.

Hi,

Wireguard is not included in the Openpli 9.1 plugins.

The installation is successful, but the decoder plugin menu doesn't appear. The folders and files are created in the correct locations.

Thanks for your help

Quote from madhouse

Quote from enigmadec

Quote from dsayers

The script should install the correct version. Can you check the plugin browser on most images this is Menu, Plugins.

See if you receive any error and take a screenshot if it does.

Hi,

Wireguard is not included in the Openpli 9.1 plugins.

The installation is successful, but the decoder plugin menu doesn't appear. The folders and files are created in the correct locations.

Thanks for your help

Display More

Hi, for the Mipsel architecture I only built for python 3.12/3.13

Display More

Hi,

So until OpenPli updates Python 3.9.9 to Python 3.12/3.13, Wireguard won't work. Can you confirm this?

Thanks

Quote from enigmadec

So until OpenPli updates Python 3.9.9 to Python 3.12

Install OpenPLi » Scarthgap build for your Zgemma H5

Image has Python 3.12.11, then you can install WireGuard VPN Python 3.12

Quote from passata

Quote from enigmadec

So until OpenPli updates Python 3.9.9 to Python 3.12

Install OpenPLi » Scarthgap build for your Zgemma H5

Image has Python 3.12.11, then you can install WireGuard VPN Python 3.12

Same thing, files and folders are created but Wireguard is not present in the plugins menu.

After installation, the following error appears:
depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/4.10.12: No such file or directory

The versione python is:

root@h5:/# python3

Python 3.12.11 (main, Jun 3 2025, 15:41:47) [GCC 13.4.0] on linux

I tried...thank you

Quote from enigmadec

depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/4.10.12: No such file or directory

File "modules.builtin.modinfo" missing ?

Add this file (unzip first) to your modules folder (/lib/modules/4.10.12/)

Then try the installation again.

wget -qO /tmp/WireGuard.sh "https://raw.githubusercontent.com/m4dhouse/Wireguard-Vpn/python-3.12/WireGuard.sh" && chmod 777 /tmp/WireGuard.sh && /tmp/WireGuard.sh

Quote from passata

Quote from enigmadec

depmod: WARNING: could not open modules.builtin.modinfo at /lib/modules/4.10.12: No such file or directory

File "modules.builtin.modinfo" missing ?

Add this file (unzip first) to your modules folder (/lib/modules/4.10.12/)

Then try the installation again.

Code

wget -qO /tmp/WireGuard.sh "https://raw.githubusercontent.com/m4dhouse/Wireguard-Vpn/python-3.12/WireGuard.sh" && chmod 777 /tmp/WireGuard.sh && /tmp/WireGuard.sh

Hi,
thank you for your cooperation, following your instructions Wireguard installed well on OpenPli Scarthgab 08/28/2025 on Zgema H5.
We hope that OpenPli version 9.2 will be released soon with the Python update.
Best regards