Oscam and tivusat

There are 6 replies in this Thread which was already clicked 2,025 times. The last Post () by piterfree.

    I have an OpenPLi image with the CIPlus plugin and a Digiquest Black TivuSat CAM. Everything works perfectly, but when combined with OSCam, the channels I normally watched with OSCam are blocked, and I get an on-screen message from the CAM trying to decode the signal incorrectly. I have not assigned any channels or providers to the CAM, and I also tried setting priority in OSCam for that CAID, but without success. How can I resolve this?

    hi, there is only one problem...that I have always encountered...there is no separation on the soft, it will be the pac...between Ci+plus and emu any emu that is used with the Ci+plus are in contrast with each other, the only soft that is perfectly functional is on the 920 with OpenPli_develo...the best that has been made, I have many decoders and I also do the tests.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    Hi Piterfree, thanks for your reply. So, is this a common issue? I must tell you, though, that with the DM920 OE2.5, I haven't encountered any problems with the CAM and OSCam. Unfortunately, however, OE2.5 doesn't support Python 3, and even Dream Multimedia has now stopped all support. Yet, this really annoying issue isn't talked about much. Would a possible workaround be to disable CI+ on channels other than the ones supported by the inserted card? Is that even feasible? Or ideally, it would be great to replicate the good work done on OE2.5, which didn't even work initially.

    on the software you mentioned there is only one way to make almost all the Tvsat channels work to avoid problems I did it by importing all the channels (favorites) of the Provaider on the (CI assignment)... in this way I found a half solution see photo with Egami.


    IMG_20240926_162945.jpg


    IMG_20240926_163134.jpg


    Ci+Plus + Reader TvSat ok

    IMG_20240926_163227.jpg


    see Egami year fixed well works as I did it reads the Card and also the Ci+Plus at the same time and also the cilinee are currently the best soft Pli and Egami,


    I did the test last night for a friend with that emu to get Canal+Extra1

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    and if you go to another channel for example redlight does it open with emu or does it try to open it with cam?? because my problem is that it tries to open it with cam and I have a black screen

    Hi friends, I bought a cardsharing is it possible to cascade into 5 receivers in oscame so that there is no ban, which will help me with a confic

    Quote from annihilator

    and if you go to another channel for example redlight does it open with emu or does it try to open it with cam?? because my problem is that it tries to open it with cam and I have a black screen

    to make it work perfectly on Egami the cilinee must be extracted the Ci+Plus tested are,

    only Reader + Card and cilinee works well so you get the best function,


    if you add the Ci+plus it conflicts with the cilinee

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

Your resource for OSCam-EMU softcam

Find configs, downloads, tutorials, and support for emulation setup, IPTV decoding, and extended protocol support. Master emulation and extended decoding with OSCam-EMU. Access dedicated support, configs, tutorials, and downloads for enhanced IPTV and service access.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login