Barry Allen v14.0

Change usb drive as 64 or 32 Go...

Do you have? /media/at

I have a dm900, i did install alan turing, on a sd card at one point

I don't know if it is different now?

Quote from stel883

Hai? /media/at

Yes. I have /media/at/

Quote from stel883

Everthing is explained here :)
Code https://gemfury.com/gm3/deb:en…gin-extensions-alanturing

There is now version 5.0-r2, both of the feed plugin and AT. It should be a lasting version and it seems to me that it works very well.

somoby can pload files ?

It can only be installed from GM3 feeds. The flash image must be based on DreamOS.

The topic is quite old, let me update it a bit.

It is undeniable that the new gm3 feed from gutemina works on DM9x0 and DM one/two.

One surprise may be that the esteemed @gutemine decides to set the validity date as with BA at 12.08.24.

I am interested in the following.

Given that on DM one/two we use OE 2.6, which is based on kernel 4.9.xx and AIO image uses the old kernel 4.3.xx, has anyone been able to install the old BA 12.91 on OE 2.6 to make an image with kernel 4.xx.xx.

I know what the problem is.

Namely, the installation works, but the AIO image uses a flash kernel and is not compatible, and of course the image does not start when the AIO image is installed.

I know that Boot loader #124 brings something new and I assume that it also allows the installation of the old kernel 4.3.xx on some partitions and on the new BA and AT they run AIO image.

Has anyone figured out how to install that separate kernel 4.3.xx in nand so that DM one/two can run an AIO image on the old BA 12.91?

There is no "old" 4.3 kernel in the AIO Image on my Dreambox one.

uname -r shows that it runs 4.9 when AIO is booted from Flash.

TB

My mistake, I have two networks at home and multiple consoles open in parallel and running on DM920 and DMTWO in parallel.

When uninstalling Barryallen on the open console I saw that BA12.91 had components from the nfs kernel, now I don't know on which box I saw it, as I said multiple consoles and logs on two different boxes.

What ist then your question? About the expiery date gutemine wrote in Dreamboard that there ist one in Legacy Version, but years to come.

I have no questions, I note that there is a solution for barryallen 12.91 that works even after @gutemine set the shutdown date, and that's why I would like to stay on version 12.91, for which there is a solution.

I tried to debug the log and find out why BA 12.91 can't mount the AIO image on DM one/two, but so far without success.

I installed barryallen_15.0-r2 on one of my boxes without its gm3 feed.

But I don't know what is built into it and how long they will be willing to let it do that.

Quote from 2kiki

I have no questions, I note that there is a solution for barryallen 12.91 that works even after @gutemine set the shutdown date, and that's why I would like to stay on version 12.91, for which there is a solution.

I tried to debug the log and find out why BA 12.91 can't mount the AIO image on DM one/two, but so far without success.

I installed barryallen_15.0-r2 on one of my boxes without its gm3 feed.

But I don't know what is built into it and how long they will be willing to let it do that.

Is simple because bainit doesnt have aio cmd integrated

And Barryallen bin file cannot detect it

And also Barryallen the bin file has a timeout so its done

Quote from ostende

And also Barryallen the bin file has a timeout so its done

Friend, you were spilling your brains a bit in your cannon arabyen panel so I don't think too highly of you, no offense.

You and I and a lot of other people know a workaround to make barrxallen 12.91 work properly on all DM boxes.

The only thing I haven't figured out yet is why they don't do AIO images on DM one/two.

If you know, welcome to the topic.

If I managed to install barryallen_15.0-r2 without @gutemine feed/gm3, I assume I have some knowledge of both software and hardware.

The internet is full of my solutions under other names, but that is irrelevant for this topic.

It saddens me that the color nicks, it listens more to the opinion than from ordinary users.

Quote

Is simple because bainit doesnt have aio cmd integrated

I don't understand this point, could you please explain?

Regarding the other post, even with the new Alan Turing and Barry Allen 15 you have to have an AIO Image in Flash (I use the nobody one with GP included) to allow booting an AIO Image from USB stick or SD card.

This would mean if you want to try to make the AIO Image work for Barry Allen 12.91, you would also better try out first to have AIO in Flash and also extracting the same image on the BA device. Then the chance that it boots would be the highest, but I failed when I tried this with my patched Barry Allen 12.91 version and now I'm using Barry Allen 15 on my box, as it satisfies all my requirements.

Trying to boot AIO from BA device with a normal OE 2.6 in Flash ist probably a waste of time, when gutemine doesn't support that combination even in her latest Plugins?

TB

Quote from Tinker Bell

Quote

Is simple because bainit doesnt have aio cmd integrated

I don't understand this point, could you please explain?

Regarding the other post, even with the new Alan Turing and Barry Allen 15 you have to have an AIO Image in Flash (I use the nobody one with GP included) to allow booting an AIO Image from USB stick or SD card.

This would mean if you want to try to make the AIO Image work for Barry Allen 12.91, you would also better try out first to have AIO in Flash and also extracting the same image on the BA device. Then the chance that it boots would be the highest, but I failed when I tried this with my patched Barry Allen 12.91 version and now I'm using Barry Allen 15 on my box, as it satisfies all my requirements.

Trying to boot AIO from BA device with a normal OE 2.6 in Flash ist probably a waste of time, when gutemine doesn't support that combination even in her latest Plugins?

TB

Display More

What do I need to do to install Barry Allen 15? How can I install it? Can it be installed on Dreambox 920?

Quote from Tinker Bell

Trying to boot AIO from BA device with a normal OE 2.6 in Flash ist probably a waste of time, when gutemine doesn't support that combination even in her latest Plugins?

You are doing something wrong, that combination works properly.

Maybe I didn't understand you correctly, but if you install any image in /date/backup with the correct box name in the image name, it successfully unpacks and boots and everything works.

If I'm not good at writing, sorry.

You already wrote that in your dm920 "every" Image works, but for the one and two gutemine disabled the Open Images and AIO Image didn't exist when Barry Allen 12.91 arrived.

Regarding Installation Just following the README works nicely and don't belive the people saying it is not deinstallable.

TB

@Tinker Bell,

I don't know who your post is referring to.

DM9x0 do all images on BA 12.91 using flash image timing tricks.

On DM 9x0 one/two, all images work on the latest version of BA and AT.

I don't know that I wrote something wrong.