friends, I wish everyone a lot of good jobs and lots of earnings my octagon sf8008 combo device that I have in my hand started to turn on and off at once while working (by itself ) bo how can I solve the problem or is there a service that can do this in istanbul greetings.
octagon sf80084k loop
- tolga8841
- Thread is marked as Resolved.
-
cihaz kendi kendine açılıp kapanıyor slot seçiyorum tekrar beni slota atıyor lütfen çözün nasıl hallederim selamlar
The device turns on and off by itself. When I select a slot, it puts me back in the slot. Please solve it. How can I fix it? Greetings.
-
friends, I wish everyone a lot of good jobs and lots of earnings my octagon sf8008 combo device that I have in my hand started to turn on and off at once while working (by itself ) bo how can I solve the problem or is there a service that can do this in istanbul greetings.Go into telnet and give a debug command or check the HDMI cable going to the TV.
but I think you need a debug to identify the problem, or better if you make a flash
-
this command save in /tmp/debug.log a file
Put here this file at the end
Codeinit 4 killall -9 enigma2 ENIGMA_DEBUG_LVL=4 enigma2.sh > /tmp/debug.log 2>&1 &for exit debug push ctrl+c on telnet
-
How very strange.
1) I wouldn't have all those modems and electrical appliances right next to it for a start.
2) Check hdmi cable
3) Check satellite cable connection. It could be shorting your box.
4) Check your remote control power button isn't stuck
5( Check yiur octagon pwer button isn't stuck.
-
unfortunately, the result has not changed, there is no solution
unfortunately, the result has not changed, there is no solutio
-
unplug the internet .hdd or ssd or usb unplug
hdmi and power cable plugged into the machine
switch on the device
how many software images are installed on this device
which software did you open it with
You have installed the Define software, if it does not open as follows
this device must have software
enigma2 open from other software like openatv or openpli or pure2
if not, put the machine in the software discard mode and discard the software
-
Lululla
Changed the title of the thread from “octagon sf80084k arıza” to “octagon sf80084k loop”. -
translate.google
turn off the receiver with the switch on the back.
hold down the off button on the front and turn on the switch on the back.
as it appears on the updt display, release the button and wait
from the menu you can
1) change boot image if you have loaded more than one.
2) load a new image from the network
network multiboot upgrade
Attention at this point immediately select a free slot on which to load the image.
not slot 1 because you will overwrite all 4 images present.
from the image select menu select with the right left buttons the image you want to install
start the loading with start upgrade and ok
OCTAGON SF8008 * SUPREME 4K UHD Linux Enigma 2 2160p H.265 HEVC Dual Wifi Multi-Stream DVB-S2X & DVB-C/T2 Combo Receiver
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
