Attached are 4 crash files for 3 different skins For 3 days, including the original skin image, in tuner configuration when setting satellites for the Diseqc. Although the setting satellites works good during the installation without a problem, when you try to re-setting it after the installation, the problem appear.
Open Pli python 3.14.3-GCC-15.2.0-sf8008-mmc Built by foxbob
-
- OCTAGON OpenPLi
- ahmed gazye
- Thread is marked as Resolved.
There are 379 replies in this Thread which was already clicked 162,444 times. The last Post () by Ahmeds200917.
-
my bootlogo design for octagon
convert jpg to bootlogo.mvi using ajpanel
or
extract rar file and use bootlogo.mvi directly
-
Display More
my bootlogo design for octagon
convert jpg to bootlogo.mvi using ajpanel
or
extract rar file and use bootlogo.mvi directly
can you explain how to do it from ajpanel?
-
Display More
my bootlogo design for octagon
convert jpg to bootlogo.mvi using ajpanel
or
extract rar file and use bootlogo.mvi directly
The boot logos look great, but unfortunately the image doesn't work....
-
Display MoreDisplay More
my bootlogo design for octagon
convert jpg to bootlogo.mvi using ajpanel
or
extract rar file and use bootlogo.mvi directly
The boot logos look great, but unfortunately the image doesn't work....
How do you use it?
-
you need to rename it as "bootlogo.mvi" and replace it with the one in
usr/share
-
you need to rename it as "bootlogo.mvi" and replace it with the one in
usr/share
That's right
Or
You can use a plugin name bootlogo swapper
And put all bootlogos in the plugin folder after renaming it serially ,
bootlogo1.mvi
bootlogo2.mvi
And so on , any number of bootlogos , so , the plugin will show different bootlogos every restart.
-
Test version, install only new - do not update. Used openatv-change mdev to uedev.
Device management replaces the mount manager - switching from mdev to udev
To know more about the difference between mdev & udev You should read the wonderful post to / Captain OpenATV Developer here
https://www.opena.tv/viewtopic.php?t=67248
from Captain OpenATV Developer post
Many users in the past have wanted better control over the automatic mounting of HotPlug devices. However, the previous approach of solving this with your own script and the mount manager reached its limits. The distinction between internal SATA hard drives and USB devices was particularly problematic, as it often no longer worked reliably with modern hardware.
Additionally, a common annoyance was that Linux would mount attached devices in the order in which they were recognized. This caused the mount point for /media/hdd to keep changing, which caused confusion. Experienced users were able to fix this by making manual adjustments to the fstab file. Others tried to use the Enigma2 interface's less-than-intuitive mount manager - with often unsatisfactory results.
What's new?
With the introduction of the new device management, which replaces the previous mount manager, and the switch from mdev to udev, there are numerous improvements:
Quick Mounter: When you connect a device for the first time, a notification appears that allows you to mount the device directly - depending on the device type (e.g. USB or MMC).
Automatic assignment of /media/hdd: If /media/hdd does not already exist, the first connected device will be assigned to this mount point by default.
More control: Users can now choose where to mount a device using an intuitive interface.
Why the switch from mdev to udev?
More modern and flexible: udev offers more functions and is the standard in current Linux distributions.
More reliable device management: udev detects devices more accurately and enables granular actions for specific device types.
Stability and compatibility: udev shows its strength particularly in setups with multiple devices at the same time.
Future-proof: While mdev is no longer actively developed, udev remains up to date and is designed for modern hardware.
New device management features
Device management goes beyond the previous capabilities of the mount manager and offers the following functions:
Device Partitioning: Create and manage partitions directly in the interface.
Split partitions: Flexible adjustment of the storage structure.
File system check: checking and repairing file systems.
FSTAB Cleanup: Cleanup of outdated entries in the fstab file.
Permanent mounts: Setting up fixed mount points via the fstab file.
Temporary Mounts: Support for short-term mounts without permanent changes
With the introduction of device management and the switch to udev, automatic mounting will not only be easier, but also more reliable and significantly more powerful. The new functions ensure that you can manage your devices optimally and easily - according to your needs.
-
Testing the image, and I try to do blindscan and I get error message, how could I correct this? I have a sf8008
-
Testing the image, and I try to do blindscan and I get error message, how could I correct this? I have a sf8008
You have to read the older posts my friend, this image does not work well and is full of bugs, use versions 9 or 9.1 from openpli for your octagonsf 8008....
-
Testing the image, and I try to do blindscan and I get error message, how could I correct this? I have a sf8008
You're supposed to post a picture of error message or crash.log So that @foxbob can fix the problem
-
Testing the image, and I try to do blindscan and I get error message, how could I correct this? I have a sf8008
hi
Download the file from the attachments, extract zip file and send file octagon-blindscan to usr/bin et change permission to 755 and restart enigma
-
Updated
https://github.com/68foxboris/My-feed/blob/main/README.md
EDIT BY MODS
USE TAG REPLY FOR LIVE LINK ;)
-
Display More
Updated
https://github.com/68foxboris/My-feed/blob/main/README.md
EDIT BY MODS
USE TAG REPLY FOR LIVE LINK ;)
Open Pil @foxbob New update
14.01.2025
master branch,python 3.13.0,gcc 14.2,glibc-2.40,openssl 3.3.1,ci+,gstreamer 1.24.11,ffmpeg 7.1,webkit-hbbtv,chromium-VU+,kodi 22.0-added stbplayer-hardware acceleration.
foxbob-GCC-14.2-sf8008-20250114_mmc
-
ahmed gazye
Changed the title of the thread from “Open Pil -GCC-14.2-sf8008-20250104_mmc Built by foxbob” to “Open Pil -GCC-14.2-sf8008-20250114_mmc Built by foxbob”. -
-
hi all
Won't this image damage my box?
-
hi all
Won't this image damage my box?
No, it did not damage your device. It works well, and the pictures are proof of that
-
hi all
Won't this image damage my box?
No, it did not damage your device. It works well, and the pictures are proof of that
Dear ahmed gazye Thank you
-
would it be possible to have Gigablue Trio 4K soon?
-
Testing the image, and I try to do blindscan and I get error message, how could I correct this? I have a sf8008
hi
Download the file from the attachments, extract zip file and send file octagon-blindscan to usr/bin et change permission to 755 and restart enigma
Thanks to all, for your answers, the Octagon brings from factory 4 slots ready to enter image, I like to test the images, like this time, the image runs, maybe not so fast, but it is nice and different with new versions(openpli) faster a little bit than egami, I don't do many tests yet, my computer generally use it to hunt feeds and see events, I will test the new update and also this file, I will upload results later. Regards
OCTAGON SF8008 * SUPREME 4K UHD Linux Enigma 2 2160p H.265 HEVC Dual Wifi Multi-Stream DVB-S2X & DVB-C/T2 Combo Receiver
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
