Why overpay if you can do everything yourself and 2 times cheaper.
In 2017, I assembled such a setup. Multifeed on a 1.2m antenna - 46e-53e-55e-57e-F-60e. And inside I had a Monoblock - 53-55-57. I adjusted the focus to 57e, glued one =head= with silicone and secured it with copper wire. An hour later I removed it, repeated the same with the last =head=. Before securing the =heads=, I found a strong signal on each satellite, noted what position the LNB should be in and only then glued and secured it with wire. Once everything dried, I rechecked the signal, it was excellent on all satellites. This afternoon I will repeat all this on other satellites. There will be a monoblock -13e-9e-F-4.8e. I adjusted the focus to 9e on the antenna perfectly and also glued and secured the =head= to 13e. The signal on 13e is 75-90% quality at different frequencies. Once it dries, I will glue it to 4.8e. On the sides in focus there is a plastic fastener - /I cut it with side cutters/. A report on the work done will be later.
If the weather is warm, I will make other monoblocks.
