bananenmann added a new file:
QuoteDisplay MoreDownload latest Package: linuxsat-support.com/cms/attachment/312239/
EDIT 28.05.2025:
I will no longer create Picon packages for VTI; the workload is simply too great. This is because the channel references of some channels (more precisely: all ARD and ZDF channels, including the data and radio channels) differ after a channel scan on a VTI image from those of an OpenATV image after its channel scan. Previously, I always had to either flash a separate VTI image or at least laboriously rename everything to edit my packages. While this was possible because I had now figured out the logic and pattern of the differences, it still cost a lot of time, effort, and effort, which I am no longer willing to invest, especially since the users in the VTI forum have been unfriendly and unappreciative. So much for the explanation.
Due to the loss of several SD channels from public broadcasters, PYUR completely restructured, or in other words, changed, its channel allocation and thus the cable frequencies of the existing channels on the night of May 27, 2025. This requires a channel scan to receive all channels again. However, this also changes the channel references, which in turn requires a change to the Picon names, analogous to the channel references, so that they are displayed correctly.
_______________________________________________________________________________________________________________________________________________________________
Stefanbenno6 - ZZZ-Picons 400x240 [8 bit] – PYUR Berlin (Cable) - ALL In One 5.0 - Reworked on 28.05.2025 !!!
Picons PYUR Berlin (Cable) + SAT (Astra 19,2°) + Settings + ICAM-Bouquets + whitelist_streamrelay + Manuals
___________________________________________________________________________________________________________
Picons for PYUR Berlin (Cable) and SAT (Astra 19.2°):
Separate packages for all possible variations (various combinations possible)
Settings for PYUR Berlin (Cable) and SAT (Astra 19.2°):
Six different, freshly created settings: either only for PYUR Berlin (Cable), only for SAT or a combination of both. There are two variants of each: One with the ICAM list as the last bouquet, and the other with ICAM channels sorted directly into the bouquets of the “normal” channels themselves.
ICAM lists for PYUR Berlin (Cable) and SAT (Astra 19.2°):
Separate bouquet lists to integrate into your own settings if desired. (But these must be current). Or already integrated directly into my supplied settings as a single, final complete bouquet: For PYUR Berlin (Cable), SAT or PYUR Berlin (Cable)+SAT. The latter therefore has two ICAM lists integrated/attached.
Current “whitelist_streamrelay” files:
Separately for PYUR Berlin (Cable), SAT or a mixture of both. For people with dual tuners: DVB-S and DVB-C. (NOT usable with VTI images!!!)
Instructions / HowTo's:
To avoid and solve possible problems. (In German and English language). More detailed explanation.
________________________________________________________________________________________________________________
Here are the ZZZ picons for PYUR Berlin (Cable) by Stefanbenno6 in 400x240 [8 bit] - as of May 28, 2025. "Picon corpses" were removed so that some "ballast" could be thrown off. New channels are of course included. For PYUR Berlin (Cable), the picon package is nearly 100% complete. Only unused and data channels do not have one. If one was missing, I simply created it myself, if Stefanbenno6 had not done it before. With the original packages from a few years ago, there are now more than 150 self-created picons for my PYUR and Telekom packages. The settings are also dated May 28, 2025 and were created after a fresh scan with good reception quality. The OpenATV package contains a "Whitelist_Streamrelay" (including illustrated instructions). This means that ICAM lists are no longer required. This function is not supported by VTI Images, because they are outdated and therefore the whole thing only works on the current OpenATV 7.3 and higher - and probably also on many other current Open Images.
The Following settings are included:
ICAM CHANNELS INTEGRATED IN SETTINGS:
Here I have integrated the respective Sky-ICAM channels into the corresponding bouquets. These are played in the usual way as usual by ICAM. Settings for PYUR Berlin (Cable) only, SAT only or PYUR Berlin (Cable) + SAT are available.
ORIGINAL SETTINGS+EXTRA ICAM BOUQUET:
Original settings with the original Sky channel references. As a final bouquet, a Sky ICAM channel list is also attached. Settings available for PYUR Berlin (Cable), SAT only or PYUR Berlin (Cable) + SAT. If you use the PYUR (Cable) + SAT - Settings, there will be two separate ICAM Lists as final Bouquets.
For people who want to use their own settings:
SEPARATE ICAM BOUQUETS:
A single, complete ICAM user bouquet for either SAT or PYUR Berlin (Cable) to integrate into your own settings. Channels can then be moved to your bouquets as desired using Dreamboxedit, for example. However, your settings must be completely up to date. Or you can copy the corresponding “lamedb” from my settings into yours and overwrite it with it. Either in your settings folder before uploading with Dreamboxedit or directly via FTP on the box in the "etc\enigma2" folder.
For people who no longer want to use ICAM lists:
WHITELIST STREAM RELAY:
Already included in the OpenATV package. It is NOT supported by VTI. For SAT and PYUR Berlin (Cable) - either mixed together or separately, depending on what settings you want to use. As mentioned, only works with the current OpenATV 7.3 image and some other Open images. Illustrated instructions are available. If you want to use your own settings, they must be very up-to-date because some frequencies changed for Sky short time ago. However, these are already taken into account in the “whitelist_streamrelay”. If you want to use my settings, then simply take the “ORIGINAL-SETTINGS+EXTRA-ICAM-BOUQUET” and delete the last (SKY-ICAM-) bouquet there. This is the easiest way, because you can simply delete it while watching TV with the help of your remote control.
The following Picons are available:
A) Completely for all SAT channels, provided if picons were available in Stefanbenno6's package. (566 picons)
B) Complete for all PYUR Berlin (Cable) channels. Package nearly 100% complete (408 picons)
C) ONLY for SAT for my self-created setting list. For people who want to save space. (295 picons)
D) ONLY for PYUR Berlin (Cable) for my self-created setting list. For people who want to save space. (266 picons)
E) ICAM Picons ONLY. Suitable for both SAT and PYUR (identical channel references.) (74 picons)
Now you can mix as you like: If you want to use the SAT+PYUR Berlin (Cable) settings, for example, you need picons for SAT (either completely or just for the settings) plus those for PYUR Berlin (Cable) (also either all or just for my settings) and also the ICAM picons. You only don't need the latter if you work with "whitelist_streamrelay"* (without an extra ICAM list).
Enjoy !!! ;)
