OscamEmu For All (by Youchie) Support

which image you use?

Quote from Hannibal_Lecter

which image you use?

I have Open Black Hole 5.4.003 image installed from a backup that I found at this forum last year. Also I updated all drivers last year.

perpariml

Oscam is just an emulator that will or will not open a channel. If you have the correct key ( constant.cw) for that channel in the log then it should open. What is that channel with caid 7801 and AA00 and which encryption.

Constant.cw keys works very short or maybe few hours or days.

FYI I cannot remove any plugin using Blue Panel or a receiver's menu. There are always some errors on screen all the time.

Does anybody have a good backup for a Open Black Hole image with a latest drivers and emu's updates for Vu+ Zero?

Many thanks in advance!

Hello dear,

I have an issue is with Sky De Icam - when I switch to EPG Guide while watching any Sky de Icam channel crashlog appears and my STB restart automatically.

What is a problem with this EPG Guide for Sky De Streamrelay channels? My Oscam emu version is 1884

Thanks in advance!

Quote from mayday10

when I switch to EPG Guide while watching any Sky de Icam channel crashlog appears

what image and skin are you using?

1_0_19_83_6_85_21_0_0_0_20250622213955.jpg1_0_19_83_6_85_21_0_0_0_20250622214342.jpg

Quote from cosy

Quote from mayday10

what image and skin are you using?

1_0_19_83_6_85_21_0_0_0_20250622213955.jpg1_0_19_83_6_85_21_0_0_0_20250622214342.jpg

I use the latest image update openbh-5.5.1.012.release-vuzero-85f779f5 from the Board

Current built-in skin is at my picture 20250622_225933(1).jpg

P.S. I also have been watching Conclave at SKy Premiere :)

How can I make a screen capture from my STB via DCC Telnet command or are there any plugin for receiver's screen capture? Thank you dear!

Display More

Display More

Quote from Panda555

perpariml

Oscam is just an emulator that will or will not open a channel. If you have the correct key ( constant.cw) for that channel in the log then it should open. What is that channel with caid 7801 and AA00 and which encryption.

Constant.cw keys works very short or maybe few hours or days.

to unlock PowerVu channels, if the keys are not available on the linux-sat forum, simply wait 3 to 10 minutes, depending on your device's hardware. the keys will be decoded via EMM, stored in SoftCam.key, and the channels will unlock.
What is that channel with caid 7801 and AA00 and which encryption.

Should be powervu from a local provider dvb-c

Quote from perpariml

Hello i get this on log

Quote

• 2025/06/17 02:51:45 6490248B p (reader) constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/constant.cw:0
• 2025/06/17 02:51:45 32B78653 r (emu) Stream key delayer initialized
• 2025/06/17 02:51:45 32B78653 r (reader) Internal_SoftCam [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2025/06/17 02:51:45 47331AE9 r (reader) linuxsat-support.com [emu] Reader initialized (device=https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key, detect=cd, mhz=357, cardmhz=357)
• 2025/06/17 02:51:45 00000000 s (relay) INFO: (ecm) static dvbcsa parallel mode = 32 (relay buffer time: 1 ms)
• 2025/06/17 02:51:45 00000000 s (relay) Stream Relay server initialized. ip=0.0.0.0 port=17999
• 2025/06/17 02:51:45 4DAE3D3B c (client) plain dvbapi-client granted (SMARTCAM, au=auto (5 reader))
• 2025/06/17 02:51:45 36775282 h (webif) webif: decompressed 178663 bytes back into 481568 bytes
• 2025/06/17 02:51:45 36775282 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer fix enabled, try fixing stream relay audio/video sync...
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 7
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 7801 ECM_PID: 1770 PROVID: 000000
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 ecmpid 1 CAID: AA00 ECM_PID: 1771 PROVID: 000000
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in CA PMT
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 7801 PROVID 000000 ECMPID 1770 ANY CHID PMTPID 008F VPID 03ED
• 2025/06/17 02:51:46 32B78653 r (reader) Internal_SoftCam [emu] card detected
• 2025/06/17 02:51:46 47331AE9 r (reader) linuxsat-support.com [emu] card detected
• 2025/06/17 02:51:46 6490248B p (constcw) Searching CW for CAID 7801 PROVID 000000 SRVID 008F ECMPID 1770 PMTPID 008F VPID 03ED
• 2025/06/17 02:51:46 4DAE3D3B c (ecm) SMARTCAM (P: 7801::008F:1770:0000 #ECM_L:61 #CW=00000000000000000000000000000000 HOP:00): rejected reader sid (9 ms) by constant.cw
• 2025/06/17 02:51:46 4DAE3D3B c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 1 disabled ecmpids!
• 2025/06/17 02:51:46 4DAE3D3B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 7801 PROVID 000000 ECMPID 1770 ANY CHID PMTPID 008F VPID 03ED
• 2025/06/17 02:52:45 36775282 p (constcw) Searching CW for CAID 7801 PROVID 000000 SRVID 008F ECMPID 1770 PMTPID 008F VPID 03ED
• 2025/06/17 02:52:45 4DAE3D3B c (ecm) SMARTCAM (P: 7801::008F:1770:0000 #ECM_L:61 #CW=00000000000000000000000000000000 HOP:00): rejected reader sid (9 ms) by constant.cw

Remove an inappropriate line from a file for reader contant.cw

Hi, Can you provide a format that novice users can use to update oscam bin from usb? Thank you

Hello everyone.

Why can't I see my CCcam servers in oscam status, with oscam by youchie...?

I read somewhere that you could see them.

Quote from Atilla Atilla

Hi, Can you provide a format that novice users can use to update oscam bin from usb? Thank you

Which device do you mean? Android device?

Quote from EnoSat

Quote from perpariml

Hello i get this on log

Quote

• 2025/06/17 02:51:45 6490248B p (reader) constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/constant.cw:0
• 2025/06/17 02:51:45 32B78653 r (emu) Stream key delayer initialized
• 2025/06/17 02:51:45 32B78653 r (reader) Internal_SoftCam [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2025/06/17 02:51:45 47331AE9 r (reader) linuxsat-support.com [emu] Reader initialized (device=https://raw.githubusercontent.com/smcam/s/main/SoftCam.Key, detect=cd, mhz=357, cardmhz=357)
• 2025/06/17 02:51:45 00000000 s (relay) INFO: (ecm) static dvbcsa parallel mode = 32 (relay buffer time: 1 ms)
• 2025/06/17 02:51:45 00000000 s (relay) Stream Relay server initialized. ip=0.0.0.0 port=17999
• 2025/06/17 02:51:45 4DAE3D3B c (client) plain dvbapi-client granted (SMARTCAM, au=auto (5 reader))
• 2025/06/17 02:51:45 36775282 h (webif) webif: decompressed 178663 bytes back into 481568 bytes
• 2025/06/17 02:51:45 36775282 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer fix enabled, try fixing stream relay audio/video sync...
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 7
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 7801 ECM_PID: 1770 PROVID: 000000
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 ecmpid 1 CAID: AA00 ECM_PID: 1771 PROVID: 000000
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 found 2 ECM pids and 2 STREAM pids in CA PMT
• 2025/06/17 02:51:45 4DAE3D3B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 7801 PROVID 000000 ECMPID 1770 ANY CHID PMTPID 008F VPID 03ED
• 2025/06/17 02:51:46 32B78653 r (reader) Internal_SoftCam [emu] card detected
• 2025/06/17 02:51:46 47331AE9 r (reader) linuxsat-support.com [emu] card detected
• 2025/06/17 02:51:46 6490248B p (constcw) Searching CW for CAID 7801 PROVID 000000 SRVID 008F ECMPID 1770 PMTPID 008F VPID 03ED
• 2025/06/17 02:51:46 4DAE3D3B c (ecm) SMARTCAM (P: 7801::008F:1770:0000 #ECM_L:61 #CW=00000000000000000000000000000000 HOP:00): rejected reader sid (9 ms) by constant.cw
• 2025/06/17 02:51:46 4DAE3D3B c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 1 disabled ecmpids!
• 2025/06/17 02:51:46 4DAE3D3B c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 7801 PROVID 000000 ECMPID 1770 ANY CHID PMTPID 008F VPID 03ED
• 2025/06/17 02:52:45 36775282 p (constcw) Searching CW for CAID 7801 PROVID 000000 SRVID 008F ECMPID 1770 PMTPID 008F VPID 03ED
• 2025/06/17 02:52:45 4DAE3D3B c (ecm) SMARTCAM (P: 7801::008F:1770:0000 #ECM_L:61 #CW=00000000000000000000000000000000 HOP:00): rejected reader sid (9 ms) by constant.cw

Remove an inappropriate line from a file for reader contant.cw

If you’re not using constant.cw, disable it in the reader section and use softcam.key instead.

Quote from pioppo

post deleted

Do you mean using cccam.cfg along with OSCam readers?

I was referring to seeing together with the CCcam readers, with those of oscam, in oscam status

Quote from pioppo

I was referring to seeing together with the CCcam readers, with those of oscam, in oscam status

i’m not understand what you mean.

could you please explain it a bit more clearly ,with a picture or an example

In web if I can see the cline, and the oscam readers together.?

Quote from pioppo

In web if I can see the cline, and the oscam readers together.?

yes

Thank you and how..?

Quote from pioppo

Thank you and how..?

like this !!!

Screenshot 2025-08-05 011246.png