blocked ferguson ariva - erom recovery tool

  • sky pirate
  • Closed
  • Thread is marked as Resolved.

There are 3 replies in this Thread which was already clicked 6,537 times. The last Post () by fRUTTiFrESH.

    in ,my case it was a ferguson ariva 102, but i think it works on all ariva models.joint10
    be careful with the firm.
    it has to be for your model.


    this little tool with a serial cable rs232
    will reload your box with a new image - firmware
    start the program erom and have connected your blocked box with
    your pc.
    not every pc has a serial com port connection.:doubt:
    find the firm in the program on files
    reload the bootloader as well.
    don+t know, just play around with it.
    when you think you have it right,
    switch the ariva on and off,
    this will start the flash progress.
    if its not flashing you have done something wron.
    play with it.
    is fun.
    el pirate:caz3:

    Also works for the ariva 202e, although I used the original erom program from Ferguson. An additional step at the begining, which caught me out, would be to check the com port settings are correct on the PC , i.e. baud rate 115200 and even parity. My com port was set to 9600 no parity, so the communication link failed immediately. I also had to flash twice once the com connection worked, as the first flash did not recover the box.

Firmware, downloads and support for Ferguson Ariva HD.

Your community resource for the Ferguson Ariva HD satellite receiver — firmware images, channel lists, plugins and setup help.