Making a Ricovery file for VU+ devices to treat the device's problem stuck on Logo

Usually, devices are attached to Luqo, no matter how successful and previously tried updates we put them

The cause of the problem is usually the change of the Potleuder for the receiver due to the screening of the Neutrino or Titannit

the solution:

+ Entry to Neutrino

https://neutrino-images.de/neutrino-images/nightly/

+ Download our device updates (ZIP and TGZ)

+We dismantle the pressure on the two updates

+We open the update in the ZIP format and we delete the following files from it

We leave the rest:
rootfs1.tar.bz2

rootfs2.tar.bz2

rootfs3.tar.bz2

rootfs4.tar.bz2

kernel1_auto.bin

kernel2_auto.bin

kernel3_auto.bin

kernel4_auto.bin
+We take the two files in the update that is in TGZ format, which is all that is not and we integrate them with a file after it was previously modified
+ The resulting file is what we update ... then directly the receiver remains stuck to worry only we update it with a previously tested update

+ The resulting file is what we update ... then directly the receiver remains stuck to worry only we update it with a previously tested update