problem on boot 100 but dcc working and cannot change the boot

I had problem when I give the image file of channels and stop on the front screen on 100 loading

and then the receiver restart and again stop on 100 loading

I tried to inter to recovery mood but the usual way but the receiver did not response

but I found that the receiver connect to the dcc

how can I use dcc link to boot to another image on the receiver ?

my receiver is octagoon 8008 and the image is pure

I found the solution (thanks to god)

cp /boot/STARTUP_RECOVERY /boot/STARTUP

reboot

Quote from giorbak

There are several ways to boot into another image.

One simple way, with visual confirmation, is as follows:

- Connect to your box via FTP.

- Go to the /boot directory.

- Copy to your PC a STARTUP file that you know belongs to a working image (e.g., STARTUP_4).

- Rename the file to STARTUP.

- Copy the file back to the /boot directory, replacing the existing one.

- Restart the box, and it will boot into the working image.

Display More

thanks for these steps