Sorry for using a translator, I hope it's still clear...
Sorry for the length...
I have OBH 5.0.0.13...
I ran some tests on a few channels, and once the tests were complete,
I put everything back in place, but to be on the safe side, I decided to do what I always do in these cases,
restore the configuration backup I had just made.
When it reached 30%, a message appeared with the following text: "Unfortunately, the servers
are unavailable due to maintenance work. Please try again later."
The decoder restarted completely, everything works and nothing seems to have been lost.
I did the same test on another image in multiboot, which is a clone of the main one.
Every now and then I update channels and timer lists using a configuration backup
made with the main image, and in that case I get the same error message.
If I perform the restore with the network cable disconnected, the operation
reaches 50%, then a window appears as when the decoder crashes and only enigma2 restarts.
Same procedure on another image in multiboot, it's OBH 5.2, when I installed it,
I only installed the settings backup so that I could have
all the settings I had made right away, I didn't install any plugins.
In this case, installing the settings backup made from the image in use
worked.
I don't understand what it means that the servers are not available to restore
configurations that are all local.
If it helps... I also tried to manually install a plugin from the
temp folder, again with the network cable disconnected, and here too, items appear in the work window
saying that some packages have not been downloaded, but the plugin ultimately
installs without any problems.
Do you have any idea what might have happened and why such a useful function
suddenly no longer works, and why the operation of the backup settings restore attempt changes depending on whether the decoder is connected to the network or
disconnected from the network?
Thank you all
Scusate se uso un traduttore,spero sia chiaro ugualmente...
scusate per la lunghezza...
Ho OBH 5.0.0.13...
ho fatto alcune prove su alcuni canali,una volta terminati i test,
ho rimesso tutto a posto, ma per sicurezza ho deciso di fare come sempre in questi casi,
ripristinare il backup configurazioni che avevo appena fatto.
Arrivato al 30% è apparso un messaggio con il seguente testo: "Purtroppo i server
non sono disponibili a causa di lavori di manutenzione. Riprova più tardi."
Il decoder si è riavviato completamente,tutto funziona e non sembra che sia andato perso nulla.
Ho fatto la stessa prova su altra immagine in multiboot,è il clone di quella principale,
ogni tanto aggiorno canali e timerlist proprio usando un backup configurazioni
fatto con immagine principale, anche in quel caso stesso messaggio di errore.
Se eseguo il restore con cavo di rete scollegato invece l'operazione
arriva al 50%,poi appare finestra come quando il decoder va in crash e si riavvia solo enigma2.
Stessa procedura su altra immagine in multiboot,è la OBH 5.2,quando l'avevo installata,
avevo solo fatto installazione del backup impostazioni proprio per avere
subito tutte le impostazioni fatte,non ho installato nessun plugin.
In questo caso l'installazione del backup impostazioni fatto da immagine in uso
ha funzionato.
Non capisco cosa significa che i server non sono disponibili per fare un restore
configurazioni che è tutto in locale,
se può servire...ho anche provato ad installare in manuale un plugin dalla
cartella temp,sempre con cavo rete scollegato,anche qui nella finestra di lavoro appaiono voci
che dicono che qualche pacchetto non è stato scaricato,però il plugin alla fine
si installa senza problemi.
Avete idea di cosa possa essere successo e perchè una funzione così
utile improvvisamente non funziona più,e con il decoder in rete o
scollegato dalla rete cambia il funzionamento del tentativo di ripristino del backup impostazioni?
Grazie a tutti voi
