OpenPli 13.4 DM800se sim2.1& original ssl84d

Jedi Maker Xtream also does not offer IPTV discounts.

Quote from mrlu

-DM800se -SIM2.10 clone & original

-GCC 13.4

-Glibc 2.39

-GStreamer 1.26.8

-Python 2.7.18

-OpenSSL 3.2.6

-Busybox 1.36.1

-Linux kernel 3.2

-feed server is workong

-Build date: 2025-11-22

Display More

Hi,
but I noticed that OSCAM doesn't work with any settings...???
config...for tivusat cards doesn't read with any OSCAM...!!

Your image doesn't have working sci cardreader support.

2025/11/28 17:43:03 38F35B62 r (reader) ziggo [internal] ERROR: Opening device /dev/sci0 (errno=19 No such device)

2025/11/28 17:43:03 38F35B62 r (reader) ziggo [internal] Cannot open device: /dev/sci0

2025/11/28 17:43:03 00000000 >> OSCam << cardserver log switched, version 2.25.11-11906-802@a93e1a0c (mipsel-oe-linux)

2025/11/28 17:43:05 38F35B62 r (reader) ziggo [internal] ERROR: Opening device /dev/sci0 (errno=19 No such device)

2025/11/28 17:43:05 38F35B62 r (reader) ziggo [internal] Cannot open device: /dev/sci0

2025/11/28 17:43:07 38F35B62 r (reader) ziggo [internal] ERROR: Opening device /dev/sci0 (errno=19 No such device)

2025/11/28 17:43:07 38F35B62 r (reader) ziggo [internal] Cannot open device: /dev/sci0

2025/11/28 17:43:09 38F35B62 r (reader) ziggo [internal] ERROR: Opening device /dev/sci0 (errno=19 No such device)

2025/11/28 17:43:09 38F35B62 r (reader) ziggo [internal] Cannot open device: /dev/sci0

2025/11/28 17:43:11 38F35B62 r (reader) ziggo [internal] ERROR: Opening device /dev/sci0 (errno=19 No such device)

2025/11/28 17:43:11 38F35B62 r (reader) ziggo [internal] Cannot open device: /dev/sci0

2025/11/28 17:43:11 38F35B62 r (reader) ziggo [internal] Deactivating card

2025/11/28 17:43:11 38F35B62 r (reader) ziggo [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)

2025/11/28 17:43:11 00000000 s (main) init for all local cards done

Quote from mrlu

-DM800se -SIM2.10 clone & original

-GCC 13.4

-Glibc 2.39

-GStreamer 1.26.8

-Python 2.7.18

-OpenSSL 3.2.6

-Busybox 1.36.1

-Linux kernel 3.2

-feed server is workong

-Build date: 2025-11-22

Display More

Как загрузить и установить wicard? Я не смог установить oscam по тому чтo в папке плагинов нет oscam-emu

Quote from Jani49

Quote from mrlu

-DM800se -SIM2.10 clone & original

-GCC 13.4

-Glibc 2.39

-GStreamer 1.26.8

-Python 2.7.18

-OpenSSL 3.2.6

-Busybox 1.36.1

-Linux kernel 3.2

-feed server is workong

-Build date: 2025-11-22

Display More

Как загрузить и установить wicard? Я не смог установить oscam по тому чтo в папке плагинов нет oscam-emu

Display More

Wicard-Tvsat-mips

IMG_20251209_121830~2.jpg

IMG_20251209_122001~2.jpg

IMG_20251209_122343~2.jpg

ok.

Я начинающи, если можно обясните на примере dreambox 800hd se, sim210. Какие файли откуда взять и куда забрасывать

How do I configure OSCAM configuration files for OpenPLY 13.4? What changes should I make to each?

with the pc put the file that I posted you in a folder and with the Dcc send the files that are in the folder to the dm 800se and give it permissions 755 for each file that is inside the folder and then restart the box

Quote from piterfree

with the pc put the file that I posted you in a folder and with the Dcc send the files that are in the folder to the dm 800se and give it permissions 755 for each file that is inside the folder and then restart the box

Wicard-TVSAT-mips, this? What folder should I send it to? Where should I enter my sharing settings? If so, could you provide more details? Thanks in advance for your help.

Quote from Jani49

Quote from piterfree

with the pc put the file that I posted you in a folder and with the Dcc send the files that are in the folder to the dm 800se and give it permissions 755 for each file that is inside the folder and then restart the box

Wicard-TVSAT-mips, this? What folder should I send it to? Where should I enter my sharing settings? If so, could you provide more details? Thanks in advance for your help.

[reader]

active = 1

name = server_1

type = cccam

auto_provider = all

auto_caid = 1

auto_idents = 1

auto_update = 1

account = user:pass@server.com:port

debug = 1

reconnect_delay = 1

emm_cache = 1

ecm_ttl = 15000

reconnect_to_account_ip =1

[reader]

active = 1

name = server_2

type = cccam

auto_provider = all

auto_caid = 1

auto_idents = 1

auto_update = 1

account = user:pass@server.com:port

debug = 1

reconnect_delay = 1

emm_cache = 1

ecm_ttl = 15000

reconnect_to_account_ip =1

[reader]

active = 1

name = shara3

type = newcamd525

account = user:pass@server.com:port:0102030405060708091011121314

debug = 3

[reader]

active = 1

name = cs

type = newcamd525

account = user:pass@server.com

multiport = 3000,3005,55011,55005,55009,55006,55020,55014,55024,55007

debug = 3

[filter]

active = 1

name = bloker

type = both

rule = caid=4ae1;ident=11;privdata!=110000000102,FE;reject

rule = accept

[reader]

active = 1

type = emu

file = /usr/keys/SoftCam.Key

debug = 3

[reader]

active = 1

type = emubiss

caid = 2600

file = /usr/keys/SoftCam.Key

ecm_queue_size = 8

[reader]

active = 1

type = emuvia

caid = 0500

ident= 030B00

file = /usr/keys/SoftCam.Key

ecm_queue_size = 8

[reader]

active = 1

type = emucworks

caid = 0D00

file = /usr/keys/SoftCam.Key

ecm_queue_size = 8

[reader]

active = 1

name = func

type = funcard

filter = bloker

fw_file = /usr/keys/FunCard.a90

intee_file = /usr/keys/int_ee.bin

extee_file = /usr/keys/ee36.bin

snippet_file = /usr/keys/initial_snippet.bin

force_ua = 052105B3

extee_size = 16

#timeout = 2500

emm_cache = 0

debug = 3

linuxsat-support.com/cms/attachment/332923/

This is what it looks like via FTP

Dear friend, don't be too harsh on me. I'm a beginner and don't know much.

I'm using a DreamBox 800HD SE with a SIM210 and OpenPLUS 13.4. I booted up OSCAM EMU, launched DCC, and connected the receiver to my computer via FTP. Now I don't know what to do. Help me out, I'd be very gratefu

IMG_20251211_101042.jpg

IMG_20251211_101102.jpg

IMG_20251211_101159~2.jpg

IMG_20251211_101114.jpg

IMG_20251211_101207.jpg

IMG_20251211_101216.jpg

IMG_20251211_101224.jpg

Image 3.png

I don't have a wicardd folder.

do nothing go into Config

Image 5.png

Image 5.png

Image 5.png

I just went in and there's no Wicard there.

Wicard-Tvsat-mips

But the files I posted there were sent as you opened the first web...with DCC

IMG_20251211_105533~4.jpg

but if you don't send those files that I posted, how can you make wicard work if everything is not inserted.

But what software are you using? The clone or

the original software...?