I have a U5Mini machine, and strangely, when I received it, there were no labels or MAC addresses, just like in the picture without any instructions. Now I have encountered a problem. I downgraded the Android firmware to Android 7.0, but there is no E2 menu. I need to write the MAC address to start the E2 menu. How can I find the MAC address of the machine in this situation?
How to know the physical MAC address of U5Mini machine？
- dmfans
- Thread is marked as Resolved.
-
I want to know how to find the fixed Mac of that machine?
CodeDirections/information -
我想知道如何找到那台机器的固定Mac号码？
Code路线/信息Sorry, I don't understand
-
Connect it to a router with cable and from your router configuration u will get connected devices and their u will find its mac
-
用网线将它连接到路由器，然后在路由器的配置信息中，你会看到已连接的设备列表，在那里你可以找到它的MAC地址。
Thank you. I found a problem. After each brush, the MAC address in the network cable configuration is different. Obviously, this is not the fixed MAC address of the machine. It is randomly variable.
-
Houston we have a problem... the mac is usually on the device or on the box it came with.
If you can get into android, it could be under something like
ATV settings
settings > status > mac address/
settings > about device > status
IF your device is connected to your home internet. You might also be able to get it from your routers home page under connect devices -
You can also connect the box directly to your laptop or pc and run cmd
arp -a
And it will give u the mac
It must start with 00:1A:79
Firmware, downloads and support for Dinobot U5 Mini 4k.
Your community resource for the Dinobot U5 Mini 4k satellite receiver — firmware images, channel lists, plugins and setup help.
