Hi,
if you had a working LAN...disable it first,
then go to the active Wi-Fi and find your favorite. You can then save it, but I recommend...disable DHCP...it should be red...and add the DNS manually.
There are 54 replies in this Thread which was already clicked 8,420 times. The last Post () by master64nl.
Hi,
if you had a working LAN...disable it first,
then go to the active Wi-Fi and find your favorite. You can then save it, but I recommend...disable DHCP...it should be red...and add the DNS manually.
Hi piterfree, I was using OpenPli 12.3 Python 2.7.18 and everything worked without problems with rtl8812au enabled and LAN disabled.
But with OpenPli 15.2 Python 3, any version configured with rtl8812au, when the decoder is turned back on, the LAN reactivates and the WAN doesn't connect. I should point out that I use static DHCP, not automatic.
OK,
on the modem, if it's a newer model, you need to give it the option to permanently use the internet.
Some modems go into hibernation after the Wi-Fi connection isn't working.
I don't think it's due to the modem,
because with OpenPLI 12.3 this anomaly doesn't occur.
As an ignoramus, I assume it's due to differences in driver compilation between Python 2 and Python 3.
WLAN connection problem in OpenPLi 15.2.
The DM920 decoder, equipped with an RTL 8812AU USB stick, has the LAN setting disabled and WiFi enabled. Furthermore, without a physical network cable connection, it connects regularly via WiFi. However, every time the decoder is turned on, the LAN setting reactivates, causing conflict
with the WiFi network, which cannot connect.
To re-establish the WiFi connection, I have to disable the LAN setting
every time I turn the decoder on.
Works for me perfectly
is this based on 9.1 or 9.2 ?
224
The 8812au wireless driver now works,
but the newly loaded image slows down the decoder's startup time.
Other images are faster at startup, but they have the 8812au driver issue that conflicts with the LAN network.
Hi
The image has no added features.
chkroot MultiBoot
Link to the topic here
Display MoreHi
The image has no added features.
chkroot MultiBoot
Link to the topic here
We use openmultiboot.
Display MoreDisplay MoreHi
The image has no added features.
chkroot MultiBoot
Link to the topic here
We use openmultiboot.
Yes this plugin is too old and not working wih DreamOS image.
Its funding was discontinued by its source.
Installed flawless new installation.
MRLU if you can and have time can you made a new imgae for DM520 and DM800V2 original?
Don’t have an account yet? Register yourself now and be a part of our community!