Hello everyone.
A question: Why am I losing channel signal?
My firmware is OpenATV, with the Aglare skin.
To get the light, do I need a cable to connect to the card?
Scanning issue (Pioppo)
- pioppo
- Thread is marked as Resolved.
-
I noticed something, I have signal on some mediaset channels. My server with oscam-master opens all these packages! But I miss the signal on almost all channels!
dvbapi (client: Enigma2, protocol version: 3) 0086:183D@000000 Focus HD [Mediaset] disable Stream Relay
-
test,
Screenshot_2026-02-20-13-18-02-129_com.android.chrome~2.jpg
Screenshot_2026-02-20-13-19-19-794_org.mozilla.firefox~3.jpg
if you use oscam...save on oscam,
cccam save to cccam
or a scan on the transponder..!!
-
the best is a logfile from sky
-
-
You need to check if it works with the OSCAM protocol, reboot, and then set the CCCAM protocol.
One of the two must work.
-
test , request mode one by one , and au off
-
I still don't have satellite signal! Since I installed softcsa, even with streamrelay disabled...!
With a clean image, I have signal everywhere.
You need to check if it works with the OSCAM protocol, reboot, and then set the CCCAM protocol.
One of the two must work.
It works with the OSCAM protocol, and the CCAM protocol is set. In fact, I have light and satellite signal on Media7et, but no satellite signal on the other packages...!
-
I dont understand how enabling a decryption method affects satellite reception/scanning. You can scan/find channels without being able to decrypt/view them. Please enable debug log, and perform a scan of the affected satellite with softcsa disabled, save the log. Repeat with softcsa enabled. Once we have both logs, we can forward to the developers to look at your issue.
What do you mean by "I have light"
-
If you have cards, you must set enable = 0 under the reader.
-
I dont understand how enabling a decryption method affects satellite reception/scanning. You can scan/find channels without being able to decrypt/view them. Please enable debug log, and perform a scan of the affected satellite with softcsa disabled, save the log. Repeat with softcsa enabled. Once we have both logs, we can forward to the developers to look at your issue.
What do you mean by "I have light"
In fact, it's absurd...! I even did a manual search for some channels, but it didn't find anything. I'll take a new image first.
-
I would do it like this: New image with my oscam and settings. First, check the whitelist with StreamRelay.
So create the file. Now get Sky working. In my experience, no scan is possible if you're set to Sky. So, ZDF or something else. If possible, delete the whitelist and reboot (important). Now watch SoftCSA.
-
abu baniaz
Changed the title of the thread from “Piopio scanning issue” to “Scanning issue (Pioppo)”. -
I have moved the posts into their own thread as they are not softcsa related in my opinion. Should he provide logs that confirm It is, I will forward to the coder and move posts back.
We seem to have people piggybacking on any thread.
It sounds to me he is using stream relay. Using stream relay has always affected scanning.
Anyway, please also say which version and date of OpenATV you are using.
You have yet to explain what " get the light" means.
-
So, if he means the SNR signal, then that's only missing with iCam channels.
If he has satellite and there's a request in oscam, the antenna should be working.
Stream relay requests are also visible in the log.
They come before the three CAIDs, but you don't see them in the log file.
A better description would be helpful.
I'd attribute the light issue to the fact that it's not getting bright.
If he does it as described, it will definitely work.
-
What does "not getting bright" mean?
OpenATV Team Images Support Forum ~ based on OE-Alliance
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
