Logo Octagon SF8008

Quote from dmht13

Hello,

My receiver Octagon SF8008 has lost its logo.

The first twelve percents of boot the screen is black.

The logo red and blue of Octagon is not displayed anymore.

I would like to get it back.

Thanks for your help.

Here's the solution: #7

https://openspa.info/threads/%…-un-octagon-sf8008.58894/

It's in Spanish. The same thing happened to me.

Display More

Hi, look here friend, it's very nice for me....

Post

RE: OpenATV boot logo remains when booting DefineOS

You can flash the splash screen on a hisilicon box from putty/telnet.
I've changed mine on 3 boxes. An AX61 and 2 x SF8008's.

Just copy logo.img to /tmp

Connect to the box with putty/telnet and cd /tmp

Then issue the following command:

dd if=/tmp/logo.img of=/dev/block/by-name/logo

Reboot and new logo should be there.

Thanks to dpeddi & Ev0-BH from the Blackhole Team for the info

These are 2 standard logos and 1 I made myself.

linuxsat-support.com/cms/attachment/286953/…

Willo3092

Oct 29th 2024

Upload file to: /tmp/logo.img

Connect via SSH

dd if=/tmp/logo.img of=/dev/block/by-name/logo

sync

reboot

You probably have another problem, because this method works perfectly; otherwise, if you reflash your device with a recovery image, everything will revert to factory settings....

It seems you're not familiar with this device... Keep in mind that flashing it with a recovery image will erase everything; your Octagon will revert to factory settings, and then you'll need to install an image like OpenATV 7.6 recovery... You need a tutorial to learn how to do it...

[TUTORIAL] how to flash octagon sf8008 – ENIGMA2

OpenATV Downloads

Hi, here's what AI says about your problem, personally I don't have the solution, I've never encountered this problem....

On the Octagon SF8008, the disappearance of the splash screen (the "Octagon" logo that appears immediately upon startup) following a recovery flash is often linked to the corruption of a specific partition or the use of an incomplete flash file.

Here are the steps to restore your original boot logo:

1. Perform a "Full Recovery" using the `recovery_emmc.zip` file.

A standard flash of an Enigma 2 image does not always overwrite the low-level partitions where the splash screen is stored.

Download: Download the specific image file named `recovery_emmc.zip` (rather than a standard update image) from the website of your preferred image provider (e.g., OpenATV).

USB Preparation: Format a USB flash drive to FAT32 and extract the archive contents to the root directory. You should end up with a folder named `octagon` and a file named `usb_update.bin`.

Flashing Procedure:

Turn off the receiver using the power switch located on the back panel.

Insert the USB drive into the USB 3.0 port (the blue port, located on the side).

Press and hold the Standby button located on the front panel.

Turn on the rear power switch while continuing to hold down the Standby button until "Updt" appears on the front display panel.

In the Recovery menu that appears on your TV screen, select "Recovery From USB".

Please try this

Octagon SF8008, SF8008mini, SF8008gold 1.Change start/boot logo:

A USB stick is required. The usb_update.bin file is copied to this in the main directory.

Switch off the receiver at the back.

Insert the USB stick into the side of the box.

Start the box and keep the standby button pressed. Box boots into maintenance mode

Now select "Recovery from USB" in the old recovery menu and wait until the flash process is complete.

In the new recovery menu, this item is called "Flash Recovery Image"

Reboot receiver enjoy new boot logo

Try this:

Octagon SF8008 – Instalar imagen de Fabrica

En el receptor enigma2  Octagon SF8008 es posible realizar la instalacion de la imagen enigma2 de fabrica a traves del menu recovery, en este articulo vamos a…

jungle-team.com

Install factory settings.

Then you can install OpenATV online