SKY UK Config

I have my own card and it is working when softCSA channels are selected but when i select a channel that dosnt require softCSA i get a green ND and output from the card which looks like correct codewords but the screen stays blank. would anyone be able to help.

Looking at what Oscam Is reading it is a 0961 card

It seems to be all the channels that don’t require softCSA one that I can think of off the top Of my head is Discovery.

This is my configuration for the card. on discovery for instance I get a green light and CW output but no picture or sound. If i switch to sky one which uses softCSA extentions i get CW output green light and the channel clears.

[reader]

label = sky_uk

protocol = internal

device = /dev/sci0

caid = 0961

boxid =

ins7e11 = 15

readtiers = 2

detect = cd

mhz = 357

cardmhz = 357

group = 1

emmcache = 1,3,2,0

blockemm-g = 1

Im still stuck i can understnad why the streamrealy / soft CSA channels work fine but the channels that dont require it show in the log cw but screen is blank. Im wondering if oscam is miss reading the card as all the online searching points to the sky CAID being 0963 but if this is the case these other channels would have worked. It is defiantly a CAID 0961 Card

update i seem to have found what causes the odd behaviour disablecrccws = 0 set all the channels that use SoftCSA do not work as soon as you set it to disablecrccws = 1 the softCSA channels stop working and the channels that dont require it work.

Is there anyway to dynamically switch it on and off as the effected channels are on the same CAID so I cannot use the whole CAID filter.