Hi all, recently got a 0500 x card, have 2 omni's pcsc can see both and recgonise, trying to add new account
ect. with the existing 0963 it conflicts ecg.. dont know how to do it..
using ubuntu 10.4 desktop (dummies version)
any help would be appericated..
Ubuntu Omnikey configs/help
- annie12
- Closed
- Thread is marked as Resolved.
-
-
What cards do you have mate ?
-
sly/ fusion x oscam shows it as 43800,fff8f0
-
[reader]
label = omnikey_1
description = ***HD
protocol = pcsc
device = 0
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 2
blockemm-unknown = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1change red as needed
-
ya have it ok for that config and the device =0 / device =1 ect ta
but trying to get the 2 to work together is the problem TIA -
yeh i had probs mate i had to reinstall, but yep 0 1 2 3 ect
-
thanks but i can get either 1 of them working i dont have a hardware problem ta..
-
sly/ fusion x oscam shows it as 43800,fff8f0
Add the red to your existing config,
In oscam.conf add the new port for the xxx card like this[newcamd]
port = 10050@0500:043800;port@0963:000000
key = 0102030405060708091011121314In oscam.server a reader entry for the fusion card, im guessing your second omnikey is device=1 adjust if necessary
[reader]
label = fusion
protocol = pcsc
device = 1
caid = 0500
detect = cd
ident = 0500:43800,fff8f0
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1Adjust your oscam.user so it can access both cards (groups)
[account]
user = user
pwd = pass
description = local
group = 1,2
au = sly cards reader nameAdd this nline to your CCcam.cfg
N: 127.0.0.1 10050 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
As you have set in oscam.user
This should have both cards running.
-
card in onimkey right way? scaned ok ?
-
Thanks ten you might be good enough to do me a fresh user config to go with server ?? TIA
-
Thanks ten you might be good enough to do me a fresh user config to go with server ?? TIA
PM me what you have at the moment & ill send them back to you mate.
-
just done a reboot the 0500 is now working ok no sly
-
Do you need:
mhz = 357
cardmhz = 357I thought for omnikeys this wasn't needed as it auto detected?
I have 3 omnikeys running. Two with caid 0963 (two card with diff entitlements) and the other with cyfra caid.
Am using a diff account for each card.
If you want to see the relevant files I can email them to you.
-
well i am not that hot with Linux, probably copied it from some ware any help if much appreciated cheers annie
-
Try these configs mate,
Oscam.server
Code
Display More[reader] label = slyuk protocol = pcsc device = 0 caid = 0963 detect = cd group = 1 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-s = 1 blockemm-g = 1 [reader] label = fusion protocol = pcsc device = 1 caid = 0500 detect = cd ident = 0500:43800,fff8f0 group = 2 emmcache = 1,3,2 blockemm-unknown = 1 blockemm-s = 1 blockemm-g = 1Oscam.user
Code[account] user = local-card pwd = pass description = local group = 1,2 au = slyuk keepalive = 1Oscam.conf
Code
Display More[global] logfile = /var/log/oscam.log cachedelay = 120 nice = 1 maxlogsize = 10000 preferlocalcards = 1 readerrestartseconds = 60 lb_mode = 1 lb_save = 200 lb_savepath = /var/log [newcamd] port = 10050@0500:043800;10001@0963:000000 key = 0102030405060708091011121314 [webif] httpport = 8888 httpuser = admin httppwd = admin httprefresh = 10 httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255Add these to your CCcam.cfg
-
Your a f__kin star perfect well appreciated m8
-
Glad its working & your happy annie12.
Thread Closed.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
