Ubuntu server webif problems

Hi to all

Great forum, hope I can contribute.
two days ago I switched from debian server running cccam only to ubuntu running oscam/cccam2.13 and for the most part seems to work. However I cannot access the webif part when I enter 192.xxx.x.xx:8888, all I get at this point is "This webpage is unavaiable". If i just enter 192.xxx.x.xx then I get "It works... No content has been added yet."
My oscam.conf is as follows:

[global]
logfile = /var/local/oscam.log
nice = -1
maxlogsize = 0
cachedelay = 120
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 0.0.0.0-255.255.255.255
httprefresh = 10

[newcamd]
key = 0102030405060708091011121314
port = xxxxx@0963:000000
keepalive = 1
debug = 255

I am sharing ok but this has had me stumped for 2 days. I read earlier problem from Chris4 and changed "httpallowed" to above and rebooted but no luck, hope someone can help.

Thanks Ten
In your link for the latest version of oscam, do I go to the last thread and download that link, dated yesterday? I am using Ubuntu 12.04 , 32 bit.
When I update I assume I need to edit my 3 oscam files, conf., user and server, is this correct?
Thanks in advance.

Thanks
Will give it a go and report back

Sorry Ten

Sorry for being stupid but which of the 3 files do I use for my 32 bit 12.04 ubuntu?

Hi ten

many thanks, all sorted with webif which is great, and can see who is connected in my cccam port.
Only issue I have now is that espn is not clearing which is the reason I started the change over from only cccam to oscam/cccam in the first place.
my white list is:
ecmwhitelist = 0963@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7D,7E,80,8B,85

which I think is the latest. Any ideas appreciated but glad to get one thing sorted.
Back later.

Sorry Ten
This will be like pulling teeth for you ever time you ask a question but I know little about oscam. is that the file in var/local? If it is should I be erasing anything out so that others cannot see?
I looked at there briefly and it has entries up to 13:20.

Ignore bit about time looking at top of file rather than bottom, will report back.

Hi Ten

Lots of entries as follows:

2012/10/03 14:58:55 99926F0 r ***uk [smargo] smargo init
2012/10/03 14:58:55 99926F0 r ***uk [smargo] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/10/03 14:58:55 99926F0 r ***uk [smargo] Cannot open device: 003:002

Earlier entries also:

2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.srvid" (errno=2 No such file or directory)
2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.tiers" (errno=2 No such file or directory)
2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.provid" (errno=2 No such file or directory)
2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.guess" (errno=2 No such file or directory)
2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.ird" (errno=2 No such file or directory)
2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.whitelist" (errno=2 No such file or directory)
2012/10/03 13:20:55 0 s ERROR: Cannot open file "/usr/local/etc//oscam.cacheex" (errno=2 No such file or directory)

I see whitelist mentioned in these errors and these files are not present.

These 3 lines appear and are repeating every minute.

2012/10/03 15:36:55 99926F0 r ***uk [smargo] smargo init
2012/10/03 15:36:55 99926F0 r ***uk [smargo] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2012/10/03 15:36:55 99926F0 r ***uk [smargo] Cannot open device: 003:002

Hi Cap
everything else is ok, I have done a "lsusb" and 003:002 is correct.

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

Wher is "scan usb" option exactly?

Oscam.reader as follows:
[reader]
label = sxxxx
protocol = smargo
device = 003:002
enable = 1
cardmhz = 600
mhz = 600
ident = 0963:000000
boxid = yourboxid
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
lb_weight = 101
emmcache = 1,3,2
group = 1
caid = 09xx
ecmwhitelist = 09xx@000000:3E,4F,42,44,45,47,4E,53,54,56,61,67,62,68,69,6A,6B,6E,6D,6F,71,72,73,77,78,74,79,7A,7C,7D,7E,80,8B,85

Put in some x's, not sure of protocol here.

Could you talk me through stopping cccam and starting oscam.

My cccam.cfg still has my old entries
eg
BOXKEY: /dev/ttyUSB0 0x xx xx xx
SERIAL READER: /dev/ttyUSB0
smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6800000

could this be a problem and how do you tell server to start oscam first and then start cccam?