Hello,
Thanks for this great tutorial.
After reading for a few weeks i thought it was time to build my server.
Following this manual worked ok for me, but now i have a few questions/problems.
Do i read the card with the cccam or with the oscam ?
when i add this to my cccam.cfg, i see my entitlements in cccam
#SERIAL READER : /dev/ttyUSB0 smartreader+
#SERIAL READER : /dev/ttyUSB1 smartreader+
#SERIAL READER : /dev/ttyUSB2 smartreader+
i drive 300km this afternoon to get myself a smargo cardreader, the only one they had was for 3 cards, but i will do for now with 1 card connected .
but i think i need to connect the card with oscam. and that's where i have the problem connecting the card.
I deleted those lines from my cccam.cfg so the card is not in use.
when i do the "lsusb" command the i see this :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0403:6011 Future Technology Devices International, Ltd FT 4232H Quad HS USB-UART/FIFO IC
Bus 003 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
so the things i tried in the oscam.server are these :
[reader]
label = tvvlaanderen
protocol = smartreader
device = Serial:Reader (tryed 0 -->3 here)
services = tvvlaanderen
caid = 0100
detect = cd
mhz = 500
cardmhz = 500
ident =
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
dropbadcws = 1
ratelimitecm = 4
ratelimitseconds = 10
and the same, but just these things changed
protocol = smargo
device = /dev/ttyUSB0
witch worked for a moment untill a reboot, then i got errors again
also tryed
protocol = smartreader
device = 001:002
because this is detected during the usb scan :
Bus 001 Device 002: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC
iProduct 2 Triple Reader+
iSerial 3 00000966
also tryed with the serial .....
So i'm kind of stuck here .
Any help would be appreciated :)
Regards,
Cyberbreezer