Hi,
I'm not able to read my card with my new receiver. I have an Amiko Alien 2 with spark 1.2.58 and oscam 1.20-unstable_svn build #7180 (sh4-linux). It seems it doesn't like the configuration I used in the older receiver.
From logs I just catched this:
---------------------------------------------------------------------------
----
>> OSCam << cardserver started at Sat Oct 27 11:50:19 2012
---------------------------------------------------------------------------
----
2012/10/27 11:50:19 0 s starting thread log_list_thread
2012/10/27 11:50:19 0 s log_list_thread thread started
2012/10/27 11:50:19 0 s >> OSCam << cardserver started, version 1.20-unstable_svn build #7180 (sh4-linux)
2012/10/27 11:50:19 0 s version=1.20-unstable_svn, build #7180, system=sh4-linux, nice=-1
2012/10/27 11:50:19 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/10/27 11:50:19 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/10/27 11:50:19 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/10/27 11:50:19 0 s services reloaded: 0 services freed, 17 services loaded, rejected 0
2012/10/27 11:50:19 0 s userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
2012/10/27 11:50:19 0 s signal handling initialized (type=sysv)
2012/10/27 11:50:19 0 s 1046 service-id's loaded in 15ms
2012/10/27 11:50:19 0 s can't open file "/var/keys/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/10/27 11:50:19 0 s 880 provid's loaded
2012/10/27 11:50:19 0 s 10 lengths for caid guessing loaded
2012/10/27 11:50:19 0 s can't open file "/var/keys/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/10/27 11:50:19 0 s can't open whitelist file /var/keys/oscam.whitelist
2012/10/27 11:50:19 0 s can't open cacheex-matcher file /var/keys/oscam.cacheex
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s monitor: disabled
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s camd33: disabled
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s camd35: disabled
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s cs378x: disabled
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s newcamd: initialized (fd=4, port=12666, crypted)
2012/10/27 11:50:19 0 s -> CAID: 09CD PROVID: 000000
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s pandora: disabled
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s csp: disabled
2012/10/27 11:50:19 0 s Starting listener 0
2012/10/27 11:50:19 0 s radegast: disabled
2012/10/27 11:50:19 0 s starting thread http
2012/10/27 11:50:19 0 s http thread started
2012/10/27 11:50:19 0 s starting thread reader check
2012/10/27 11:50:19 0 s reader check thread started
2012/10/27 11:50:19 0 s starting thread check
2012/10/27 11:50:19 0 s check thread started
2012/10/27 11:50:19 0 s *** [internal] creating thread for device /dev/sci0
2012/10/27 11:50:19 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/27 11:50:19 0 s waiting for local card init
2012/10/27 11:50:19 5A1EF0 r *** [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2012/10/27 11:50:19 5E4698 h HTTP Server: Creating IPv6 socket failed! (errno=97 Address family not supported by protocol)
2012/10/27 11:50:19 5E4698 h HTTP Server: Trying fallback to IPv4.
2012/10/27 11:50:19 5E4698 h HTTP Server listening on port 8888
2012/10/27 11:50:20 5A1EF0 r *** [internal] card detected
2012/10/27 11:50:24 5A1EF0 r *** [internal] Error activating card.
2012/10/27 11:50:30 5A1EF0 r *** [internal] Error activating card.
2012/10/27 11:50:35 5A1EF0 r *** [internal] Error activating card.
2012/10/27 11:50:35 5E4698 h all debug_level=65535
2012/10/27 11:50:35 5A1EF0 r *** [internal] card initializing error
And this is how I configured the reader:
[reader]
label = ***
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
BoxID = xxxxxxx
#mhz = 357
#cardmhz = 357
caid = 09CD
ident = 000000
services = ***it
emmcache = 1,1,2
group = 1
dropbadcws = 1
And this is oscam.conf
[global]
Nice = -1
ClientTimeout = 5
CacheDelay = 120
disablelog = 0
logfile = /tmp/oscam.log
saveinithistory = 1
disableuserfile = 1
[newcamd]
Key = 0.....4
Port = 12666@09CD:000000
oscam.dvbapi
P: 4AE1:000000
P: 0100:003311
P: 0100:003315
P: 0100:003317
P: 0100:000068
P: 0500:000000:000F:0021
P: 0500:000000:0001:0024
P: 0500:000000:0002:0021
P: 0500:040810
P: 0500:042700
P: 0500:024F00
P: 0500:043800
P: 1880:000000
P: 183D:005411
P: 09CD:000000
P: 093B:000000
P: 0963:000000
P: 0BAA:000000
I: 0100:000030
Any idea?
Thanks
