external broadcast

There are 14 replies in this Thread which was already clicked 1,390 times. The last Post () by blacksx.

    this is depressing me now. i have my server working perfectly internally but when i port forward i get nothing. can someone help me go through each individual file on oscam and cccam and dissect this problem so i can get this working once and for all?


    any suggestions on where to start would be great.

    VU Duo VIX OE3.0


    OSCAM 1.20-unstable_svn build #6059
    CCcam 2.1.3 server

    i did try to install an updater on my server by terminal but im not sure if it completed as i got lost and gave up. surely i could use the current ip address to eliminate DNS?

    VU Duo VIX OE3.0


    OSCAM 1.20-unstable_svn build #6059
    CCcam 2.1.3 server

    Check if your port is correctly opened with:


    Code
    http://www.yougetsignal.com/tools/open-ports/
    • Official Post
    Quote from blacksx

    i did try to install an updater on my server by terminal but im not sure if it completed as i got lost and gave up. surely i could use the current ip address to eliminate DNS?


    Well if it did install you can check or reconfigure it with this,


    Code
    dpkg-reconfigure ddclient



    Check its not active anywhere else & see how you get on buddy.

    just some basics


    Your server is at home ?


    Your dns is working ?

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

    set your routers web interface to allow remote access then try your dns from a remote location !
    i would log into my neighbours wireless and type [http://blacksx.dns.org:80] (or whatever port the router web interface is set to i have used 80 in the example ip-most virgin routers are preset to 8080) -
    If you get the router login page you know your Dns is working !

    78cm dish on tm2300 metal gear motor + 1m Orb with tm2300 + 1.8m Channel Master on H-H floor mount + 80cm ISS with TM2300 AND Inverto Black LNB,inverto Unicable QUDL 42 LNB,- Global invacom Dscc LNB,- Triax KA LNB, - Yuri LNBF C Band YLF-CDP16C

    im totally convinced talk talk are blocking my ports! i have had 4 routers in th past month and i have NEVER once been able to open a single port? i have had friends round and they are baffled too. i have also used various different port checking sites!!!

    VU Duo VIX OE3.0


    OSCAM 1.20-unstable_svn build #6059
    CCcam 2.1.3 server

    Quote from Ten Below

    Go back to your dns setup page & make sure the part in red below contains your external ip.




    I have the updater working correctly mate as my URL takes me directly to my routers login page. U had a line from me working before mate, since then I think the only change I've made is installing Webmin. Do u think this could have changed

    VU Duo VIX OE3.0


    OSCAM 1.20-unstable_svn build #6059
    CCcam 2.1.3 server

    • Official Post
    Quote from blacksx

    I have the updater working correctly mate as my URL takes me directly to my routers login page. U had a line from me working before mate, since then I think the only change I've made is installing Webmin. Do u think this could have changed


    Well if i put my own dns in my browser it certainly doesnt do that, installing webmin will not have affected anything unless you have chosen a port for webmin that is also used as your server listen port.

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management