HELP!! Can't find Galaxy 19 with my openbox x3

I got a openbox x3 reciver, connected to 22 inch dish.
And I spent 2 days turning it from 91.0W Nimiq 1,2 to 110.0W Echostar 10,11.
I cant see any sats in between those two.
I was using the TP's for Galaxy 19 from lyngsat and did everything incl.
changed dish angle, LNB skew, and was turning it from Nimiq to Echostar about 100 times,
changing tps and LNB freq. Still cant find it. Please help.

My LNB:

LNB Manufacturer: Ariza
Model No: GK-532-30
Input Freq: 12.20 - 12.70 GHz
Output Freq: 950 - 1450 MHz
L.O. Freq: 11.25 GHz
Conversion gain: 50 dB (min.) / 62dB (MAX.)
Noise Figure: 0.3 dB

My Antenna Settings:

LNB Power: ON
LNB Type: Universal
LNB Freq: 9750/10750
22 Khz: OFF
TP Freq: 11789 V 28125-2/3
11836 V 20765-3/4
11929 V 22000-3/4
11991 V 22000-3/4
12060 H 22000-3/4
12084 V 22000-3/4
12090 H 20000 3/4

:beated:

I bought a 36 inch dish with a standard linear LMB. I'm going to install it today and see what happens.

I installed the dish. Do I use k or c band?
Do I use standard 10750? Trying to find it using TP 11789 V 28125 and nothing yet.

I am using an LMB indicating Universal twin LMBF 10.7 - 12.75 Ghz.
Is this standard. Or universl? I tried so much today to find 97.0 but no luck. Still need some help and suggestions.