I have configured by oscam and are trying to debug my oscam settings but since i cant get in contact with the readers i cant debug the settings based on the commands lsusb&dmesg etc. i'm getting the following log.
The log file belows tells me they are disconnected and i have a message latency timer -32 every time i check with the command lsusb
Looking in different forums to find out how to come around this small issue but i can't find any answers anywhere.........
I have installed the latest Ubuntu including the latest oscam but nothing helps.
Please could anyone help me out with a hint or a command where i could change the settings for the latency timer etc if this is the real problem?
I have tried with a separate hub for the USB powered by separate power connector, nop didn't help.
Now im totaly lost.........
Dec 2 15:05:28 Klient modem-manager[448]: <info> (ttyUSB0) opening serial port...
Dec 2 15:05:41 Klient modem-manager[448]: <info> (ttyUSB0) closing serial port...
Dec 2 15:05:41 Klient modem-manager[448]: <info> (ttyUSB0) serial port closed
Dec 2 15:05:41 Klient modem-manager[448]: <info> (ttyUSB0) opening serial port...
Dec 2 15:05:47 Klient modem-manager[448]: <info> (ttyUSB0) closing serial port...
Dec 2 15:05:47 Klient modem-manager[448]: <info> (ttyUSB0) serial port closed
Dec 2 15:05:47 Klient kernel: [ 238.354006] usb 1-2.1: new full speed USB device number 4 using uhci_hcd
Dec 2 15:05:47 Klient kernel: [ 238.477559] ftdi_sio 1-2.1:1.0: FTDI USB Serial Device converter detected
Dec 2 15:05:47 Klient kernel: [ 238.477843] usb 1-2.1: Detected FT232BM
Dec 2 15:05:47 Klient kernel: [ 238.477913] usb 1-2.1: Number of endpoints 2
Dec 2 15:05:47 Klient kernel: [ 238.477924] usb 1-2.1: Endpoint 1 MaxPacketSize 64
Dec 2 15:05:47 Klient kernel: [ 238.477934] usb 1-2.1: Endpoint 2 MaxPacketSize 64
Dec 2 15:05:47 Klient kernel: [ 238.477943] usb 1-2.1: Setting MaxPacketSize 64
Dec 2 15:05:47 Klient kernel: [ 238.479045] ftdi_sio ttyUSB1: Unable to read latency timer: -32
Dec 2 15:05:47 Klient kernel: [ 238.481122] usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB1
Dec 2 15:05:47 Klient mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:04.2/usb1/1-2/1-2.1"
Dec 2 15:05:47 Klient mtp-probe: bus: 1, device: 4 was not an MTP device
Dec 2 15:05:47 Klient modem-manager[448]: <info> (ttyUSB1) opening serial port...
Dec 2 15:06:00 Klient modem-manager[448]: <info> (ttyUSB1) closing serial port...
Dec 2 15:06:00 Klient modem-manager[448]: <info> (ttyUSB1) serial port closed
Dec 2 15:06:00 Klient modem-manager[448]: <info> (ttyUSB1) opening serial port...
Dec 2 15:06:06 Klient modem-manager[448]: <info> (ttyUSB1) closing serial port...
Dec 2 15:06:06 Klient modem-manager[448]: <info> (ttyUSB1) serial port closed
My card settings bye using try&error
label = sat1
enable = 1
protocol = smartreader+
device = /dev/ttyUSB0
detect = ring
mhz = 357
cardmhz = 357
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 1
caid = 0B00
emmcache = 1,3,2
[reader]
label = sat2
enable= 1
protocol = smartreader+
device = /dev/ttyUSB1
detect = ring
mhz = 357
cardmhz = 357
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 2
boxid = 823F4B8F #fake number
caid = 093E
emmcache = 1,3,2
