How do i get the 9991 working or access on my blademedia box

There is 1 reply in this Thread which was already clicked 2,119 times. The last Post () by mondeo.

    How do i get the 9991 working or access on my blademedia box, am new to this and just uploaded firmware and now have channell listings, now for the next step if you can help

    blade7000.txt
    Make sure you install custom firmware on the blade
    bm7000s or you cannot add a cline.
    Download the software and put it on a usb stick and plug
    it in to the receiver, go to utilities, then go to
    downloads press ok and choose the firmware on the stick
    and press ok again, now let it upload the firmware to
    your receiver.
    Whilst watching any tv channel press on the remote
    control 9991.
    A menu will appear called server list on connection 0
    press ok and again enter the password 9991
    it will give you a service editor.
    1 NAME you can leave this as it is connection_0
    2 PROTOCOL change to cccam by pressing right arrow on
    the remote
    3 TIMEOUT 3 sec
    4 FILTERMODE auto
    5 FILTERLIST 0
    6 ID enter here the user see example
    7 PASSWORD enter her the password see example
    8 DES-KEY leave the way it is
    9 ADDRESS some.address.org Enter here cccam address see
    example
    10 PORT 12345 enter port see example
    This is an example c line
    c: some.address.org 12345 user password

Firmware, downloads and support for Blade Media.

Your community resource for the Blade Media satellite receiver — firmware images, channel lists, plugins and setup help.