Hello Every one Iam Currently successfully running a multiple satellite set-up with open box s9 receiver.The Scenario of my set-up is I have 2 c band dishes and 3 Ku band. Each C band dish has 4 to 5 offset lnbs. apart from 3 ku band dishes.Total 11 lnbs connected.
One C band dish is placed on 1st floor and other C band along on the second floor along with other ku band dishes.
Now what i have done is connected a 8 port diseqc 1.1 switch on second floor and connected 7 LNBs on the 7 ports and on the 8th port i carried the out with with cable (approx 20 meter cable ) Ist floor and added a Diseqc 1.0 Switch and connected 4 lnbs there.
Now in the receiver Satellite set-up i mapped the ports properly for all the seven ports in diseqc 1.1 and on the 8th port enabled s both diseqc 1.1(8th port) & 1.0 (port 1,2,3,4 respectively for all the 4 sats ) This setup is working perfectly with the openbox S9 and iam receiving all the sats simultaneously.
Now i want to do the same set-up in Vu solo receiver
Does it have both the options diseqc 1.0 and 1.1 Separately ? and can we use options same way which i have mentioned above ?
Experts Please guide
