First of all I would like to say thanks to everyone at the site who makes this hobby possible to the masses.
I recently bought a HP ProLiant MicroServer AMD Turion II N40L/2GB/250GB and smargo triple reader, obtained a nds sly uk card and started reading. With
thanks to this forum within little time I was up and running with cccam with 2 friends connected and watching. The first instructions I followed was for
Automated cccam 2.30 install for ubuntu 64bit. All installed fine and watching pay tv using box key and card mhz set to 375.
Then the fun starts....
After 2 hours or so - myself (connected to CCcam locally 192.168.1.x) and my peers (xxxx.no.ip-org) get a glitch and it says scrambled, the picture then
comes back and a cycle begins....a glitch/scramble every 5 minutes or so.
The reciever (ferguson arriva HD) then needs to be rebooted and when it reconnects the cycle starts again. 2 hours of uninterupted TV then scramble, then every 5 mins a gñitch/scramble.
All pings are fine. I also have a public IP address.
I have tried many automated configs for both 64 and 32 bit machines, cccam 2.13, 2.14, 2.21 and 2.30. I have tried both ubuntu and debian servers. I have even tried manual install without extra scripts for CCcam check etc.
I am currently using Debian 6 32bit with automated CCcam/Oscam install and smargo (single reader)
All with the same result........
Seriously guys!!! I´m pulling my hair out now!!! Has anyone heard of this??????
Thanks in advance. Keyser Soze
My Config :-
SERVER LISTEN PORT : 55600
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :@@@@
WEBINFO PASSWORD :@@@@
TELNETINFO USERNAME :@@@@
TELNETINFO PASSWORD :@@@@
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 17001
ZAP OSD TIME :0
#OSD USERNAME :root
#OSD PASSWORD :dreambox
#OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#serial reader: /dev/ttyUSBO smartreader+
#serial reader: /dev/ttyUSB1 smartreader+
#serial reader: /dev/ttyUSB2 smartreader+
#BOXKEY: /dev/ttyUSB2 @@ @@ @@ @@
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB2 3750000
N: 192.168.1.9 32000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
[global]
logfile = /dev/null
cachedelay = 120
nice = -1
preferlocalcards = 1
[newcamd]
port = 32000@0963:000000
serverip = 192.168.1.9
key = 0102030405060708091011121314
[webif]
httpport = 8888
httpuser = @@@@
httppwd = @@@@
httprefresh = 5
httpallowed = 192.168.0.0-255.255.255.255
[reader]
label = ***uk
protocol = smartreader
device = 005:002
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
[account]
user = cccam
pwd = cccam
monlevel = 0
uniq = 0
group = 1
au = ***UK
caid = 0963
Keyser Soze
