Hi gang
Can someone explain how i can download rytek sly uk from my dm800 been trying for hours to find it also using the pli image.
Many thanks
Hi gang
Can someone explain how i can download rytek sly uk from my dm800 been trying for hours to find it also using the pli image.
Many thanks
This is from the rytec website,
How to install and configure xmltv-import on Enigma2 Pli-images :
When you have installed OpenPli on your box, you can go to Applications, press the green button. Then you'll see a menu, go to extensions and look for xmltv-importer.
Press enter or OK button to start the installation. Now you have the latest version installed, restart Enigma and go to applications and you will notice the label "EPGImport".
Now go into this program, there are some options but first we press blue button to go to the sources. Here you can select with the OK button which EPG data you like to download.
Press green button to save this selection. Now we are back into the first menu where we can change the time when the plugin should start. Do not set this time before 04:00am because I create the EPG data just before 04:00am.
If your box is in deep-standby you could wake it up to start the automatic download, and you can set the amount of days for full descriptions.
Could be helpful if you have selected a lot of epg sources and your box has not much memory you could set this days on 5, so the epg data is loaded for 5 full days + 2 days.
Do not forget to save this config by pressing green button, then you will be prompted to the applications menu.
If you can't wait untill the automatic import, which I can imagine ;), you can go into the EPGImport panel and press the yellow button for a manual download, you will be asked if you agree by pressing OK.
Now you will see in the main window the amount of events it is processing.
You can press exit to go back to the application panel, it's not needed to wait untill the import is finished.
Hi Ten
Nothing under the green button so reflashed the box again still nothing under green button have you any more ideas.
Many thanks
you need to install the rytec xml importer if its not there.
From memory i think its under manage extensions.
Thanks Ten
I will have another at downloading it but last time i did it got a error message half way through it i will let you know if i manage it.
Cheers
I've just tried again but keep getting error message,
error could not download packetlist, could it be the image.
Could be the pli server is down, i would try again later on mate.
Cheers Ten i'm going to try another pli image i will let you know how i get on
I've got a pain in my ass with rytec epg. I've had green screen twice now, and the box powers off and back on, and found out its due to the box not being able to write to usb. So I reformatted the usb, remapped and changed to satmate.
Thanks Red but i'm using dreamup method and still struggling used four different images and still cant download rytec so i'm thinking it must be me. One other question can i use a vix image what i use on my vu on a dm800 clone.
Many thanks
Vix image will not work on the 800 mate, you should be able flash normally now btw.
If someone can tell me a good image to resolve my problem i'd be very gratefull.
Many thanks
Ten will that be ok for sim201-BL76c
Cheers
Yes mate just flash as normal, bootloaders included.
Ten thats the image i've had the problem with but i will try this one will all those images be ok for my sim.
Thanks for sticking with it.
Any image in that section is fine mate, addons work fine on this one, xml epg is inluded with it.
Cheers Ten just flashing it to the box now will let you know how i get on could be a long night hopefully not fingers crossed.
Many thanks once again.
Thanks Ten and to everybody all sorted jesus that took some doing.
Many thanks everyone.
Don’t have an account yet? Register yourself now and be a part of our community!