need the right config. in oscam.server for tivusat

There are 2 replies in this Thread which was already clicked 1,616 times. The last Post () by senns69.

    Hello,
    i can't use my tivusat card with oscam. the log is:


    tixxvusat [internal] Restarting reader
    2013/01/09 19:33:01 597B68 h tixxvusat [internal] creating thread for device /dev/sci0
    2013/01/09 19:33:01 5B07C0 r tixxvusat [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
    2013/01/09 19:33:01 5B07C0 r tixxvusat [internal] card detected
    2013/01/09 19:33:04 5B07C0 r tixxvusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
    2013/01/09 19:33:04 5B07C0 r tixxvusat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
    2013/01/09 19:33:04 5B07C0 r tixxvusat [internal] Setting baudrate to 115200 bps
    2013/01/09 19:33:04 5B07C0 r tixxvusat [internal] Calculated work ETU is 8.70 us
    2013/01/09 19:33:05 5B07C0 r tixxvusat [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
    2013/01/09 19:33:06 5B07C0 r tixxvusat [internal] detect nagra tiger card
    2013/01/09 19:33:07 5B07C0 r tixxvusat [internal] card system not supported
    2013/01/09 19:33:07 5B07C0 r tixxvusat [internal] Normal mode failed, reverting to Deprecated Mode
    2013/01/09 19:33:10 5B07C0 r tixxvusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
    2013/01/09 19:33:10 5B07C0 r tixxvusat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
    2013/01/09 19:33:10 5B07C0 r tixxvusat [internal] Calculated work ETU is 101.09 us
    2013/01/09 19:33:11 5B07C0 r tixxvusat [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
    2013/01/09 19:33:12 5B07C0 r tixxvusat [internal] detect nagra tiger card
    2013/01/09 19:33:13 5B07C0 r tixxvusat [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
    2013/01/09 19:33:15 5B07C0 r tixxvusat [internal] T1 Resync command error, trying to reactivate!
    2013/01/09 19:33:19 5B07C0 r tixxvusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
    2013/01/09 19:33:19 5B07C0 r tixxvusat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
    2013/01/09 19:33:19 5B07C0 r tixxvusat [internal] Setting baudrate to 115200 bps
    2013/01/09 19:33:19 5B07C0 r tixxvusat [internal] Calculated work ETU is 8.70 us
    2013/01/09 19:33:20 5B07C0 r tixxvusat [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
    2013/01/09 19:33:20 5B07C0 r tixxvusat [internal] card system not supported
    2013/01/09 19:33:20 5B07C0 r tixxvusat [internal] card initializing error


    thanks inadvance

    What you need is to introdue yourself first umakesh as per the site rules

    also you should take out the ATR of your card! :lol:


    also you should try another oscam version ,and maybe you try a more easier(smaller) config for your oscam!


    try only to setup the grounds!
    mod the config you can do later when its working!

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login