Tutoirial to load firmware S*ybox f3

There is 1 reply in this Thread which was already clicked 540 times. The last Post () by scouser97.

  • I have just been searching for a turorial for my original S*ybox to update the firmware..


    I have looked in openbox tutorials & searched for it cannot find.


    anyone ??

  • I have just been searching for a turorial for my original S*ybox to update the firmware..


    I have looked in openbox tutorials & searched for it cannot find.


    anyone ??


    Hope this helps :)


    SETTING UP ***BOX F3 / M3


    ATTACH BOX TO POWER, SATELLITE, HDMI AND ROUTER


    1: Format your USB into FAT32
    2: Drag your downloaded Image file, and if you have them, Channel list and cccam.cfg onto the usb stick.
    3: Turn on the openbox and let it boot up.
    4: Place USB stick in back of Openbox
    5: Using remote, select 'MENU', then 'TOOLS'
    6: Select 'Upgrade by USB'
    7: Make sure the top line says "Upgrade Mode <Image File(*.abs)" If it doesnt, use right or left arrow key on remote to change it until it does
    8: Move down and select the .abs file on your memory stick
    9: Move down to start and press 'OK' on remote.
    10: Select 'yes' to any questions the box may ask..
    11: Once done, the box may reboot
    12: Once done rebooting, enter menu again and select 'Single Satellite Scan'
    13: On top line select 'Eurobird 1 & Astra'
    14: Next line 'FTA Only' select NO
    15: SCAN CHANNEL : TV + Radio
    16: Scan Mode: Blind Scan
    17: Select "search"
    18: Once finished scanning, we can set up our cline


    CLINE SETUP


    1: Go back to main menu
    2: Select Network
    3: Select "CCcam Client Setup"
    4: If you have a cccam.cfg on your usb, select 'Update files by usb' if not, jump to number 27
    5: On new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, the press yellow button on remote (READ)
    6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again
    7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of all menus to tv and select a pay channel.. it should clear, if not go back into menu, select Network, then 'Network Setup', and turn DHCP 'ON' by using arrow keys and then hitting apply.
    8: if channel still doesnt clear, reboot box and router by unplugging both from power and plugging back in (router first)
    9: for those who didnt create a cccam.cfg on their usb, you can add it manually..
    a] instead of update by usb on ccccam client setup, go directly to Manage Config Files and select CCcam.cfg from new window
    b] Press Blue button on remote
    c] your cline will look something like this>>> C: example.cline.org 12000 user pass
    d] ON add cline window, leave Protocol as CCcam
    e] Host: here you would enter example.cline.org portion of your cline using remote number buttons like you was sending a text
    f] Port: here you put 12000
    g] User, write 'user' here
    f: Password, write 'pass' here
    g] Press ok and go up to instruction number 7 OF CLINE SETUP

    Vu Solo 4K Running OpenBlackhole 5.1


    MultiSat



    Panasonic 55" 4k OLED Model TX-55902B


Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!