Vu Duo - Oscam - Omnikey - Trying to add JSC via Omnikey to Sat BG & Viasat

Hi

I am running Viasat and Sat BG in Duo using Oscam 6073 & Cccam 2.13

I am trying to add JSC Viaccess using an omnikey

When I add the omnikey my users disappear?

Card is working fine in TM5402

Configs as follows:

Conf

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[webif]
httpport = 8888
httpuser = ***
httppwd = ***
httprefresh = 20
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[newcamd]
key = 0102030405060708091011121314
port = 34000@093e:000000;34001@0B01:000000;34002@0500:042400,042410,fff920

Server

[reader]
label = VIASAT
protocol = internal
device = /dev/sci0
emmcache = 1,3,2
group = 1
caid = 093e
ident = 093e:000000
boxid = ?????

[reader]
label = satellitebg
protocol = internal
device = /dev/sci1
caid = 0B01
detect = cd
mhz = 500
cardmhz = 357
ident = 0B01:000000
group = 2
emmcache = 1,3,2

[reader]
label = JSC
protocol = mouse
device = /dev/ttyUSB0
mhz = 600
cardmhz = 600
Group = 3
EMMCache = 1,3,2
caid = 0500
ident = 0500:042400,042410,fff920
ecmwhitelist = 0500@042400,042410,fff920:2F,2A

[account]
user = ***
pwd = ***
monlevel = 0
uniq = 0
group = 1
au = VIASAT
caid = 093e
ident = 093e:000000

[account]
user = ***
pwd = ***
monlevel = 0
uniq = 0
group = 2
au = SATELLITEBG
caid = 0B01
ident = 0B01:000000

[account]
user = ****
pwd = ****
group = 3
AU = JSC
caid = 0500
ident = 0500:042400,042410,fff920

In Ccam.cfg I have:

N: 127.0.0.1 34000 *** *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 34001 *** *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 34002 *** *** 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

I cannot see where am I going wrong.

All help appreciated

Hi

Tried that and now:

2013/02/17 17:49:04 58CF28 r ERROR opening device /dev/sci0
2013/02/17 17:49:04 58CF28 r Cannot open device: /dev/sci0
2013/02/17 17:49:04 58E788 r ERROR opening device /dev/sci1
2013/02/17 17:49:04 58FFE8 r ERROR opening device /dev/ttyUSB0
2013/02/17 17:49:04 58E788 r Cannot open device: /dev/sci1
2013/02/17 17:49:04 58FFE8 r Cannot open device: /dev/ttyUSB0
2013/02/17 17:50:04 58CF28 r ERROR opening device /dev/sci0
2013/02/17 17:50:04 58CF28 r Cannot open device: /dev/sci0
2013/02/17 17:50:04 58E788 r ERROR opening device /dev/sci1
2013/02/17 17:50:04 58E788 r Cannot open device: /dev/sci1
2013/02/17 17:50:04 58FFE8 r ERROR opening device /dev/ttyUSB0
2013/02/17 17:50:04 58FFE8 r Cannot open device: /dev/ttyUSB0

Hi

I have tried again and I keep getting a downgrading error message?

Thanks

Hi

done that and it sees it as a mouse but then I have no users/ clients

When I amend the JSC out of the server the clients reappear

Very strange

Thanks for your help

Quote from Ten Below

Does your oscam version have pcsc support?

How do I check?

Quote from Ten Below

If not use the version from the guide i linked to in post #2.

Where do I install that to?

Hi

I have overwrote file and I get:

Unix starttime: 1361235068
Starttime: 19.02.13 00:51:08
Version: 1.20-unstable_svn Rev. 6073
Max PID: unlimited

Active modules:
Web interface support: yes
SSL support: no
SSLv3 support: no
DVB API support yes
DVB API with STAPI support: no
Anti-cascading support: yes
ECM doublecheck: no
I***** guessing: yes
Debug mode: yes
LED support: no
Q-Box HD LED support: no
Log history: yes
Monitor: yes
Loadbalancing support: yes
LCD support: no
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
Pandora: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes
Cardreader: yes
Nagra: yes
I*****: yes
Conax: yes

Thanks