Help with server

There are 19 replies in this Thread which was already clicked 827 times. The last Post () by wozbwfc.

    i have currently been trying to set up an ubuntu server using with automatics install script from the tutorials


    ive install ubuntu got the cccam and oscam web interfaces set up, installed my omnikey, installed webadmin but im stuck at what to do next.


    i have card and placed it in the omnikey, ran pscs scan but the card shows as unresponsive. do i need to do anything with the card?


    also can anyone tell me what the next steps for me to do so i can start to share my card on my internal network to my openbox F5


    thanks

    cheers mate got the card to be read now and also posted in the introductions forum. so is my next step editing my oscam server files with the details from my card?


    nice one

    ye mate you need the configs ect for your card if you tell us what card you have we can help you further ??


    And welcome10 hope you enjoy it and respect it here with us have a read of the rules to stop you getting in trouble .

    • Official Post

    Without knowing which automatic install script you used and what card you have there is no way of telling what else needs configured..


    It`s possible oscam is already configured for your card and you only need to setup an F line in the servers CCcam.cfg for the openbox..


    Servers CCcam.cfg

    Code
    F: openbox password


    Openbox

    Code
    C: [COLOR='#FF0000']192.168.1.67[/COLOR] [COLOR='#00FF00']12000[/COLOR] openbox password


    192.168.1.67 = servers ip address
    12000 = server listen port in CCcam.cfg

    ok ive added my fline to the bottom of the ccam.cfg file and add the c to my f5, on the cam menu its says Login instead of active can you shed any light on where im going wrong?


    i take it im using the internal ip for my server 192.0.0 in the cline and not 127.0.0 whatever


    thanks

    ok so ive done a fresh install and copied the files from above onto my server the log from the status page is now showing this


    2013/02/23 13:23:10 0 s starting thread log_list_thread
    2013/02/23 13:23:10 0 s log_list_thread thread started
    2013/02/23 13:23:10 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7149 (x86_64-linux-gnu)
    2013/02/23 13:23:10 0 s version=1.20-unstable_svn, build #7149, system=x86_64-linux-gnu, nice=-1
    2013/02/23 13:23:10 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
    2013/02/23 13:23:10 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
    2013/02/23 13:23:10 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2013/02/23 13:23:10 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
    2013/02/23 13:23:10 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2013/02/23 13:23:10 0 s signal handling initialized (type=sysv)
    2013/02/23 13:23:10 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
    2013/02/23 13:23:10 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
    2013/02/23 13:23:10 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
    2013/02/23 13:23:10 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
    2013/02/23 13:23:10 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
    2013/02/23 13:23:10 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s monitor: disabled
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s camd35: disabled
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s cs378x: disabled
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s newcamd: initialized (fd=4, port=9998, crypted)
    2013/02/23 13:23:10 0 s -> CAID: 0963 PROVID: 000000
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s cccam: initialized (fd=5, port=9999, crypted)
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s pandora: disabled
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s csp: disabled
    2013/02/23 13:23:10 0 s Starting listener 0
    2013/02/23 13:23:10 0 s radegast: disabled
    2013/02/23 13:23:10 0 s starting thread http
    2013/02/23 13:23:10 0 s http thread started
    2013/02/23 13:23:10 0 s starting thread reader check
    2013/02/23 13:23:10 0 s reader check thread started
    2013/02/23 13:23:10 0 s starting thread check
    2013/02/23 13:23:10 0 s check thread started
    2013/02/23 13:23:10 0 s #mysmartcardreader [mouse] creating thread for device 002:002
    2013/02/23 13:23:10 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/02/23 13:23:10 0 s waiting for local card init
    2013/02/23 13:23:10 104E2C0 r #mysmartcardreader [mouse] ERROR: Opening device 002:002 (errno=2 No such file or directory)
    2013/02/23 13:23:10 104E2C0 r #mysmartcardreader [mouse] Cannot open device: 002:002
    2013/02/23 13:23:10 D40008C0 h HTTP Server listening on port 8888

    • Official Post
    Quote

    #mysmartcardreader [mouse] Cannot open device: 002:002


    You are using omnikey but have the [reader] setup for a smargo..


    Have you followed this http://linuxsat-support.com/li…key-readers-linux-pc.html ?


    The [reader] should be setup like this;


    ####oscam.server####


    Code
    [reader]
label = ***UK
protocol = [COLOR='#FF0000']pcsc[/COLOR]
device = [COLOR='#FF0000']0[/COLOR]
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963
ident = 0963:000000


    Make these changes then show us the log again buddy..

    thanks, made the changes you suggested and it telling me card ok (16 entitlements).


    heres a post of the status now.


    2013/02/23 14:18:04 15FDAC0 c client connected to 9999 port
    2013/02/23 14:18:04 15FDAC0 c WARNING: invalid client tcp_conn_close()
    2013/02/23 14:18:04 15FDAC0 c anonymous disconnected from 192.168.0.4
    2013/02/23 14:18:04 15FDAC0 c thread 7F058BFFF700 ended!
    2013/02/23 14:18:05 15FF4A0 c client connected to 9999 port
    2013/02/23 14:18:06 15FF4A0 c WARNING: invalid client tcp_conn_close()
    2013/02/23 14:18:06 15FF4A0 c anonymous disconnected from 192.168.0.4
    2013/02/23 14:18:06 15FF4A0 c thread 7F058BFFF700 ended!
    2013/02/23 14:18:07 1606030 c client connected to 9999 port
    2013/02/23 14:18:07 1606030 c WARNING: invalid client tcp_conn_close()
    2013/02/23 14:18:07 1606030 c anonymous disconnected from 192.168.0.4
    2013/02/23 14:18:07 1606030 c thread 7F058BFFF700 ended!
    2013/02/23 14:18:08 1609A90 c client connected to 9999 port
    2013/02/23 14:18:08 1609A90 c WARNING: invalid client tcp_conn_close()
    2013/02/23 14:18:08 1609A90 c anonymous disconnected from 192.168.0.4
    2013/02/23 14:18:08 1609A90 c thread 7F058BFFF700 ended!
    2013/02/23 14:18:09 1601290 c client connected to 9999 port
    2013/02/23 14:18:09 1601290 c WARNING: invalid client tcp_conn_close()
    2013/02/23 14:18:09 1601290 c anonymous disconnected from 192.168.0.4
    2013/02/23 14:18:09 1601290 c thread 7F058BFFF700 ended!



    this looks like its trying to connect to my ***box but cant for some reason?


    also i deleted the files from the above link as there now seem to be several copys of the oscam files and ccam files on my server but in different locations is this correct?

    you have to make a acount for your box in your server im on oscam only and i have to do this to get my box to work.


    [account]
    user = user ( change to what you wont )
    pwd = pass ( change to what you wont )
    keepalive = 1
    group = 1,2
    cccmaxhops = 3
    cccreshare = 0
    cccignorereshare = 1
    numusers = 1


    this is in my oscam.user config



    C: 123.345.1.678 78910 usuer pass


    and this is what i put in my cccam config on my duo and works a treat


    woz

    thanks woz got it sorted now, i entered my details into mgcam and its clearing the channels now. no doubt ill have plenty more questions soon, nice one

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login